ROPER WHITNEY PX24 BRAKE
Light duty bending brakes are for light forming requirements (up to 16 gauge mild steel). When used within their rated
capacity, they will form a minimum 1/2" flange over their entire length.
• Maximum Rated Capacity: 16 gauge mild steel
The PX24 Box and Pan Brakes adjustable back gauge are ideal for small, precise box and pan work (up to 3" deep). It will
accommodate sheet metal up to 16 gauge. The PX24 will bend as much as a 135¡ angle in up to a 24-inch length. Standard
fingers provided include one each 3/4", 1", 1 1/4", 1 1/2", 3", 4 1/2", and 6". Fingers are heat-treated die steel,
precision ground. Set of fingers can be arranged to form 3/4: to 24" in 1/4" increments. Back gauge adjustment is from
0-24". Adjustable friction brake lock stops upper bar dead-weight drop and permits precise positioning of upper bar to
scribed line on workpiece before final clamping. The pan brakes have optional special fingers to adapt them to inside
mitered lip boxes, 9" long square tubes and radius bends up to 1". The floor mount stand shown must be ordered as a
separate item.
Minimum 1/4" (PX24) reverse bends are possible with these light duty brakes by removing both the apron angle iron work
support and apron filler plate and reducing the capacity by four gauges.
Extension Fingers (PX24 & PX36)
For inside mitered lip boxes, minimum 2 1/2" square box.
Radius Fingers (PX24 & PX36)
Available in widths of 3/4", 1", 1 1/4", 1 1/2", 3", 4 1/2", and 6" with radii of 1/16", 1/8", 3/16", 1/4", 5/16",
3/8", 7/16", 1/2", 3/4", and 1".
Open End Finger (PX24 & PX36)
For square tubes up to 9" long. Taper from 3/4" to 1 1/2".
Specifications
| Characteristic |
No. PX24 |
| IN. |
CM. |
| Capacity, Mild Steel |
16 ga |
- |
| Max. Bending Length |
24 |
61 |
| Max. Jaw Opening |
1 |
2.5 |
| Max. Bending Length |
45°* |
- |
| Min. Flange Bend |
1/2 |
1.3 |
| Min. Reverse Bend |
1/4 |
0.6 |
*Only 20° when box fingers are used.
Ordering Guide
| Description |
Catalog No. |
Weight (Lbs.) |
| Brakes (Bench Model) |
|
|
| No. PX24*** |
155070024 |
270 |
| Floor Stand PX24 |
239006006 |
160 |
| Extension Finger |
- |
- |
| Right |
251700107 |
3 |
| Left |
251700108 |
3 |
| Open End Finger |
251700109 |
3 |
Radius Fingers
Specify radii and width desired
Radii Available: 1/16", 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 3/4", 1"
Widths Available: 3/4", 1", 1 1/4", 1 1/2", 3", 4 1/2", 6"
***PX24 brake standard equipment includes one each 3/4", 1", 1 1/4", 1 1/2", 3", 4 1/2" and two 6" box fingers. PX36 has
same, except for four 6" box fingers.
Auxiliary Attachments
Extension Fingers (PX24 & PX36)
For inside mitered lip boxes, minimum 2 1/2" square box.
Radius Fingers (PX24 & PX36)
Available in widths of 3/4", 1", 1 1/4", 1 1/2", 3", 4 1/2", and 6" with radii of 1/16", 1/8", 3/16", 1/4", 5/16", 3/8",
7/16", 1/2", 3/4", and 1".
Open End Finger (PX24 & PX36)
For square tubes up to 9" long. Taper from 3/4" to 1 1/2".
|
