| Betenbender Hydraulic Press Brakes
Versatile, accurate, rugged, easy to operate and easy to maintain.
That's the way Betenbender makes its Hydraulic Press Brakes.
Whether you bend plastic or steel, there's a Betenbender Hydraulic Press Brake to match your needs, ranging from the 17-ton model to
the 350-ton. No matter the size, each machine features convenient operation for maximum output, ease of maintenance for maximum
productivity.
Betenbender goes the extra mile to build a Hydraulic Press Brake that works hard, works accurately, and stays that way for years to come.
When your name goes on the finished product, so does your reputation. We feel the same way. Compare features. Compare results. You can
count on first-class American technology, rugged durability, versatility and economy when it’s made by Betenbender Manufacturing, Inc.
Betenbender Mfg., Inc. offers Hydraulic Press Brakes in the following sizes:
17 Ton
4', 6' |
160 Ton
6', 8', 10', 12', 14' |
50 Ton
4', 6', 8', 10', 12' |
190 Ton
6', 8', 10', 12', 14' |
70 Ton
4', 6', 8', 10', 12', 14' |
240 Ton
6', 8', 10', 12', 14' |
95 Ton
6', 8', 10', 12', 14' |
300 Ton
6', 8', 10', 12' |
120 Ton
6', 8', 10', 12', 14' |
350 Ton
6', 8', 10', 12' |
Other sizes may be available upon request!
Simple & Flexible Controls:
Use either a convenient multi-switch control panel or a 3-position fully guarded foot switch.
Accuracy:
Every Betenbender Hydraulic Press Brake is thoroughly inspected and tested. Parallelism is maintained between bed and ram, or at a
preset angle, by using precise automatic leveling controls. Parallelism is maintained at ± 0.002" in low speed.
The ram bottom reversal point is controlled by precise limit switches referenced off the bed. This isolates housing deflections which
can interfere with accuracy.
The side situated handwheel sets the bottom limit of the ram stroke. Micrometer adjustment on the control end allows for tilting or
paralleling of the ram. A bed referenced control monitors the actual distance between ram and bed, assuring repeatability independent
of die wear or end plate deflection.
Versatility:
Betenbender’s Hydraulic Press Brakes have long, full tonnage stroke; adjustable length and selectable speed combinations; adjustable
height for short stroke. A two-speed standard; three-speeds with infinitely adjustable low speed is optional. This option prevents
sudden whip up of the work during bending operations.
Maintenance:
Clevis mounted cylinders eliminate cylinder binding by reducing the possibility of oil leaks. Pins and bushings do not rotate under
load, resulting in much less wear than competitive products.
Easy Hydraulic System Maintenance:
The manifold assembly saves space and makes it easy to replace many components. The convenient work height makes the job easier
Convenient Settings:
Readouts in increments of 0.001" allows recorded settings of closed heights.
Standard Components:
The control system components, micro switches, clamp-type backgauge, hydraulic fluid and filter cartridges are all standard equipment,
making routine maintenance easier.
Flexibility:
2-speed ram is electrically controlled. It lets you shift to a lower speed before coming into contact with sheet metal.
Control:
The ram stops at the point of reference and self-levels at the bottom of every stroke. Main control cabinet enclosures are mounted on
the side frame containing magnetic, non-reversing motor starter and 110/120 volt control circuit.
Safety and Reliability:
The control system operates at 110/120 volt using a minimum of circuitry. The system operates predominantly with American made
electronics and American made motors.
Durability:
All-steel ends, rams and beds.
Electrical Equipment:
Meets requirements of NFPA79. It includes drip proof, continuous duty 45º C ambient hydraulic pump motor wired for 230 or 460 volt,
3 phase, 60 hertz.
Ram Level:
Is accomplished by two hydraulic systems. One for each cylinder, which keeps them parallel. Self-levels at bottom of each stroke
even if hydraulic system is out of adjustment
OPTIONS:
"GO-TO" CONTROLLER for new or existing Betenbender Press Brake Backgauges.
Now offering a 5 step NC positioner that can be pre-programmed with up to 5 positions that can be accessed either manually or
automatically. The operator can also enter a number that is not pre-programmed and it will tell the backgauge to "GO TO" that position.
This option can be added to new or existing Betenbender Press Brakes with power-operated backgauges, or be fitted to the Betenbender
retrofit power backgauges.
Betenbender is now CSA Certified.
|
Whether you bend plastic or steel, there's a Betenbender Hydraulic Press Brake to match your needs, ranging from the 17-ton model to
the 350-ton. No matter the size, each machine features convenient operation for maximum output, ease of maintenance for maximum
productivity.