Portable Punch
No. 5 JR. Punch
Light duty portable punches are for limited punching power (1.2 tons or less.) They are easy to carry in the pocket,
on a belt or in a tool box. hardened, machined bearing surfaces are used in these tools to provide dependable
long life within the rated capacity. The No. 5JR. punch has a standard 1-3/4" throat depth. It also has an
optional mounting base, and are available with or without the standard assortment of punches and dies shown above.
Maximum rated capacity: 1.2 tons
Smallest available
Hand operation
Adjustable stop gauge
No. XX Punch
Light duty portable punches are for limited punching power (1.2 tons or less.) They are easy to carry in the
pocket, on a belt or in a tool box. hardened, machined bearing surfaces are used in these tools to provide
dependable long life within the rated capacity. The No. XX punch has a deep throat configuration to punch up to
3-1/4" from the edge. The No. XX punch may also be used to punch light channels with 1" minimum inside dimension
and 1-3/8" maximum flange. It also has an optional mounting base, and are available with or without the standard
assortment of punches and dies shown above.
Maximum rated capacity: 1.2 tons
Smallest available
Hand operation
Adjustable stop gauge
No. 7A Punch
Medium duty portable punches are for medium punching power (up to 5 tons.) They are highly portable and of a size
that will fit in any tool chest or truck locker. The leverage design of these tools assures easy linear operation.
Unlike other similar tools, this punch will punch and strip inside a 90° arc movement of the lever; and the upper
handle will not disengage when moved to either extreme.
Options include a bench mounting base, with a 3" - 3-3/4" x 5" tapped base table; and a factory reversal of the
upper handle to provide front pull-down operation when the tool's intended use is as a bench mounted unit.
No. 8 Punch
Medium duty portable punches are for medium punching power (up to 5 tons.) They are highly portable and of a
size that will fit in any tool chest or truck locker. The leverage design of these tools assures easy linear
operation. Unlike other similar tools, this punch will punch and strip inside a 90° arc movement of the lever;
and the upper handle will not disengage when moved to either extreme.
Options include a bench mounting base, with a 3" - 3-3/4" x 5" tapped base table; and a factory reversal of the
upper handle to provide front pull-down operation when the tool's intended use is as a bench mounted unit.
No. 10 & No. 12 Punch
These punches use a rotary ball bearing operation to provide punching capacity in the medium duty range of 7.3
tons; beyond the capacity of linear operation punches. The two punches are similar, except for the deep throat
dimensions of the #12 to punch up to 2.25" from the edge to accommodate angles, channels and flanged materials.
Options include a ratchet handle to permit operation in close quarters and a base attachment for bench mounting
No. 20 Punch
Heavy duty portable punches are for heavy punching requirements. They operate through ball bearing action and
rotary operating motion. While considered portable, they are equally adept as stationary bench mounted tools.
Capacity: 20 tons
Dimensions: 7" x 11" x 4"
Weight: 25 lbs.
Return to Top
|
