LOCKFORMER PITTSBURG MACHINES
LOCKFORMER 24 GAUGE PITTSBURG JR.
The 24 gauge Pittsburgh rollforming machine has 5 forming stations and 1 inboard forming position. The forming chassis
is constructed of 1/2" steel plate. This machine is compact and lightweight and can easily be taken to the job site!
An optional Auto-Guide Power Flanger attachment is available for the 24 gauge Pittsburgh machine. The flanging
attachment follows any edge straight of irregular while forming a 7/32 (outside) flange height. Just turn up a
starting flange in the table slot, feed materials into the rolls and let go. Handles radii down to 3.25" or 1.375"
manually at speeds of 16 - 18 fpm.
An optional welded steel floor stand with lower tool and equipment storage shelf is also available for the 24 gauge
machine. Its dimensions are: 30.5" x 14.25" x 25" (L x W x H).
| |
Model 24 |
| Forming Stations |
5 |
| Capacity |
24 - 28 gauge |
| Depth of Pocket |
5/16" |
| Hammer over-edge adj. |
3/8" |
| Forming Speed |
30 - 35 fpm |
| Motor |
1/3 HP, 1800 RPM |
| Volts |
115 / 230 |
| Phase |
1 |
| Drive |
V-Belt |
| Dimensions (L x W x H) |
30" x 13.5" x 14" |
| Shipping Weight |
140 lbs. |
LOCKFORMER 20 GAUGE PITTSBURG
The 20 gauge Pittsburgh rollforming machines have 5 forming stations with 2 forming positions. One inboard forming
position forms the Pittsburgh lock and one auxiliary or outboard forming position has the capability of forming 1
of 3 different profiles. (See below for list of outboard-mounted auxiliary roll sets.)
An optional Auto-Guide Power Flinger attachment is available for the 20 gauge Pittsburgh machine. The flanging
attachment follows any edge straight of irregular while forming a 7/32 (outside) flange height. Just turn up a
starting flange in the table slot, feed materials into the rolls and let go. Handles radii down to 3.25" or 1.375"
manually at speeds of 16 - 18 fpm
| |
Model 20 |
| Forming Stations |
5 |
| Capacity |
20 - 26 gauge |
| Depth of Pocket |
5/16" |
| Hammer over-edge adj. |
3/8" |
| Forming Speed |
25 fpm |
| Motor |
3/4 HP, 1800 RPM |
| Volts |
115 / 230 |
| Phase |
1 |
| Drive |
V-Belt |
| Dimensions (L x W x H) |
36" x 16.5" x 36.5" |
| Shipping Weight |
290 lbs. |
LOCKFORMER SUPER SPEED 20 GAUGE PITTSBURG
The Super Speed 20 Pittsburgh rollforming machine has five forming stations with two forming positions. One
inboard forming position forms the Pittsburgh lock and one auxiliary or outboard forming position has the
capability of forming 1 of 3 different profiles.
Machine Specifications:
- Forming stations: 5
- Capacity: 20-26 gauge
- Depth of pocket: 5/16"
- Hammer over-edge adjustability: 3/8"
- Forming speed: 75 fpm
- Motor: 230/460v, 3 phase, 2 HP
- Dimensions: 48" x 24" x 41"
- Weight: 400 lbs.
|
LOCKFORMER 14, 16 AND 18 GAUGE PITTSBURG
The 14, 16 and 18 gauge Pittsburgh rollforming machines have 7 forming stations with two forming positions. One
inboard position forms the Pittsburgh lock; and one auxiliary or outboard position has the capability of forming
1 of 8 different profiles depending on which auxiliary roll set is ordered. (See below for list of outboard-mounted
auxiliary roll sets.) The forming speeds for the individual machines are listed in the chart below.
| |
Model 14 |
Model 16 |
Model 18 |
| Forming Stations |
7 |
7 |
7 |
| Capacity |
14 - 18 gauge |
16 - 20 gauge |
18 - 22 gauge |
| Depth of Pocket |
1/2" |
1/2" |
3/8" |
| Hammer over-edge adj. |
1/2" |
3/8" |
3/8" |
| Forming Speed |
35 fpm |
40 - 45 fpm |
40 - 45 fpm |
| Motor |
5 HP, 1800 RPM |
3 HP, 3600 RPM |
2 HP, 3600 RPM |
| Volts |
230 / 460 |
230 / 460 |
230 / 460 |
| Phases |
3 |
3 |
3 |
| Drive |
Double V-Belt |
Double V-Belt |
Double V-Belt |
| Dimensions (L x W x H) |
58.5" x 24" x 41" |
58.5" x 24" x 41" |
58.5" x 24" x 41" |
| Shipping Weight |
650 lbs. |
625 lbs. |
600 lbs. |
Optional Auxiliary roll chart
Return to Top
|
