| Betenbender Hydraulic Shears
A precision cut doesn’t happen by chance.
 
Betenbender designs simplicity and safety into its Hydraulic Shears -- with an advanced hydraulic system and flexible operation. They're
easy to operate, easy to maintain and able to withstand the rigors of today's production demands.
Betenbender Mfg., Inc. offers Hydraulic Shears in the following sizes:
LOW PROFILE
|
HIGH PROFILE
|
1/8" (10 Gauge)
2', 4', 5', 6', 8', 10', 12', 14' |
3/8"
4', 6', 8', 10', 12', 14' |
3/16"
2', 4', 6', 8', 10', 12', 14' |
1/2"
2', 4', 6', 8', 10', 12' |
1/4"(Rake Angle 1/4" per foot)
4', 6', 8', 10', 12', 14' |
5/8"
10', 12' |
1/4" LPE
4', 6'
Manual Backgauge, No Shadow Light,
Rake Angle 1/2" per foot, 1x3 Knives,
10HP Motor. |
3/4"
4', 6', 8', 10', 12' |
3/8"
2', 10', 12' |
1"
12", 4', 6' |
Controls:
Push button and switch controls are at your fingertips. The fully guarded, 2-position 110V footswitch lets you interrupt the cutting
stroke at any point in its cycle.
Easy Material Handling:
A sturdy backgauge and rake angle adjustment minimizes twist and distortion. This makes it possible to increase the rake for cutting
heavier stock and extend maximum capacity of the machine. A 4' squaring arm with recessed scale makes for fast, easy measurement.
Modified High Carbon, High Chrome Reversible Knives:
Provide four separate edges for clean cuts and long blade life. Easy blade gap adjustment means precise cuts for a wide variety of materials.
Electrical System:
Meets NFPA79 and construction requirements of the ANSI B11.4. All machines have disconnect switches, magnetic starters, 110/120 volt controls,
and 220/460 voltages.
Backgauges:
A Betenbender Hydraulic Shear is capable of shearing 1/8" (10 gauge) material to the following tolerance: Dimension - The width of the
off-cut portion of the work- piece is within ±0.005 inch of the backgauge setting.
Every shop is different. Your shop may need a Hydraulic Shear unique to your business.
Betenbender will work with you to build a Hydraulic Shear to fit your job and within your budget. Building a Betenbender Hydraulic
Shear with options is the best way to get the most from your equipment in performance and results. Plus, Betenbender Manufacturing, Inc.
offers you a quality machine in design, construction and durability.
OPTIONS AVAILABLE
- Power Lift Backgauge
- Automatic Power Lift Backgauge
- Pneumatic Sheet Support
- Extra Length on Backgauge
- Solid Table Top - Bolt on segments
- Machined Solid Top Bed
- 48" Support Arms/Front Gauges
- Inlaid Scale, 0 - 48"
- Angle Gauge
- Electronic Stroke Control
- Continuous Stroke
- Stroke Counter
- One Shot Lubrication
- Automatic Lubrication
- Ball Transfers
- Independent Holddown Control
- 4' Left Hand Squaring Arm
- Extended Squaring Arm (4’ Standard)
- Extra Foot Pedal w/Keylock Switch
|
- Keylock Switch
- Flip Up Stops (Squaring Arm)
- Disappearing Stops (Support Arm)
- Increase HP (Increase Stroke)
- Oil Cooler
- Control Panel with Optional Stroke Control
- 3-Position Power Blade Gap Adjustable with Indicator Lights
- Manual Rapid Blade Gap Adjustment (on 1/8" (10ga), 3/16", 1/4")
- 5 Station NC "GO-TO" Backgauge Positioner
- CNC Backgauge
- Neoprene Hold-down Caps
- Dovetail Slots or T-Slots
- 220/460 (specify either)
- Gap Type Machine (Slitting)
- Harder grade of high carbon, high chrome knives
- 208 Volt
- Special Paint Colors
|
Betenbender is now CSA Certified.
|
