MODEL: SRH-10-200 (MRM-H 3100 X 200)
OVERALL BENDING LENGTH: 120"
DIAMETER OF FRONT ROLLS: 7.87"
DIAMETER OF THE REAR ROLL: 7.09"
ROLLING SPEED: 19-1/2 FPM
MOTORS: 5 AND 2
DIMENSIONS-APPROX: 191"L X 44"W X 51"H
WEIGHT-APPROX: 8690 LBS.
CAPACITIES BASE ON STEEL UP TO 36,000 PSI YIELD STRENGTH:
- CIRCULAR BENDING ON DIA 5X UPPERROLL DIA & LARGER 10X1/4"
- CIRCULAR BENDING ON DIA 1.5X UPPERROLL DIA & LRGR 10X5/32"
- PREBENDING TO DIA 5X UPPERROLL DIA & LARGER 10'X5/32"
- PREBENDING TO DIA 1.5X UPPERROLL DIA & LARGER 10'X12GAUGE
WITH PREBENDING, RESULTING FLAT ENDS ARE 1.5 TO 2 TIMES
THICKNESS OR LESS.
PROPORTIONAL CAPACITIES IN OTHER MATERIAL, WIDTHS &
CONE BENDING CAPACITY IS 50% OF EACH LENGTH & THICKNESS
The SRH Plate Bending Rolls are intial-pinch type, easy to
operate and moderately prices. The frames are amply-sized
welded steel to assure rigidity and stability. The upper and
lower front rolls are driven by a brake-motor through a
heavily proportioned planetary gearbox. The brake-motor
provides rapid stopping of rolls rotation. To clamp and
drive the plate, the lower roll is easily hydraulically
adjusted from the control console.
To bend the plate, the rear roll, journalled in roller
bearings, is also hydraulically adjusted. The drop end is
hydraulically operated to allow the bent material to be
taken out of the machine. The upper front roll is designed
with a support system. A hydraulic system built into the
base of the machine supplies power for the roll adjustments
and drop end operation.
A cone bending attachment is standard equipment, and the
rear roll can be hydraulically tilted to facilitate the
cone rolling procedure.
Controls for all functions are mounted in a movable control
console which allows the operator to position himself for
convenience and ease of operation. Two electronic digital
readout show the positions of the adjustable rolls, have
programmable roll position pre-set and memory - and are
mounted in the control console.
A manual central lube system is standard equipment.
Emergency Stops wired are mounted at front & rear and
an emergency stop palm button is also provided.
The electric and hydraulic components are from well known
international companies. The machine is built to strigent
European community standards and bears the CE mark.
to complete inventory display
to our home page