78"Arm x 17"Column, CLAUSING RADIAL DRILL, MODEL#CL2000H, Hyd clamping   Our stock number: 8358

78 Arm x 17 Column, CLAUSING RADIAL DRILL, MODEL#CL2000H, Hyd clamping

Click on picture below for larger version
78 Arm x 17 Column, CLAUSING RADIAL DRILL, MODEL#CL2000H, Hyd clamping

Model: CL2000H
Working Area
Column Sleeve Dia. (E): 17"
Column Face to Spindle Center
Maximum (D+C): 78.7"
Minimum (D): 19.3"
Spindle Head Travel (C): 59.4"
Base Surface to Spindle End
Maximum (A): 74.8"
Minimum (B): 19.7"
Arm Vertical Travel (A-B): 43.3"
Arm Rotation (Right & Left): 180 Degrees
Baseplate Working Surface
Box Table Area
Length (L): 39.3"
Width (K): 31.5"
Height (H): 19.7"
Base Dimensions
Floor Area (R x S): 114.5" x 43.3"
Height (Q): 98.4"

Drill Head
Spindle Taper: 5MT
Spindle Stroke: 14.6"
Quill Diameter: 3.94"
Number of Spindle Speeds: 12
Spindle Speeds (rpm): 35-1890
Number of Steps: 6
Spindle Feed Rate (in(mm)/rev.): 0.003"(.07mm)-
0.038"(.96mm)
Spindle Drive Motor (2-speed): 7.5 hp
Elevating Motor: 3 hp
Clamping Motor: 1 hp
Coolant Pump Motor: 1/8 hp

Capacities
Drilling in Steel: 2.6"
Drilling in Cast Iron: 2.75"
Tapping in Steel: 1.97"
Tapping in Cast Iron: 2.36"
Boring in Steel: 5"
Boring in Cast Iron: 7.28"

Dimensions and Weights
Max. Machine Height (F): 124.8"
Base and Column Height (G): 116.5"
Shipping Dimensions (L x W x H): 122.2" x 55.1" x 127.5"
Net Weight: 13,448 lbs.
Shipping Weight: 14,550 lbs.


STANDARD FEATURES:
* Equipped with hydraulic separate clamping unit. Vertical
movement of arm is coordinated by an IC timer. With a single
touch on push button switch, you can have the arm unclamped
then move vertically, or stop then clamp automatically. Very
easy to operate, and tools will always stay at the same
point after tool shifting.
* Gears in gear box are cooled by oil cycled by an oil
pump to minimize gear wear.
* Friction type disc clutch absorbs impact force caused by
vertical movement of spindle, and protects all transmission
units inside gear box. With quick spindle return, the clutch
will help speed-up the tapping operation.
* Special automatic tool eject device is supplied to allow
you to change tools quickly. (No drifter is required)
* Special arm elevating device is provided to prevent arm
from falling down abruptly after years of usage.
* Coolant system
* CSA Electrics Standard
* Tool kit and manuals


TWO (2)-YEAR LIMITED WARRANTY!!










Get a Quote

Company:
Contact:
Email:
Tel:
Address:
City St ZIP:
Fax:

How did you hear of us?
Additional information on your request:
   

Please enter text from above:

RETURN to complete inventory display       RETURN to our home page