Column Sleeve Dia. (E): 21.65"
Column Face to Spindle Center
Maximum (D+C): 98.4"
Minimum (D): 19.7"
Spindle Head Travel (C): 78.7"
Base Surface to Spindle End
Maximum (A): 78.7"
Minimum (B): 21.6"
Arm Vertical Travel (A-B): 39.4"
Arm Rotation (Right & Left): 180 Degrees
Baseplate Working Surface: 86.8" x 43.4"
Box Table Area
Length (L): 39.4"
Width (K): 31.5"
Height (H): 22"
Floor Area (R x S): 138.6" x 55.1"
Height (Q): 12.6"
Spindle Taper: 6MT
Spindle Stroke: 17.7"
Quill Diameter: 3.94"
Number of Spindle Speeds: 16
Spindle Speeds (rpm): 16-1250
Number of Steps: 16
Spindle Feed Rate (in(mm)/rev.): 0.0015"(.04mm)-
Spindle Drive Motor (2-speed): 10 hp
Elevating Motor: 5 hp
Coolant Pump Motor: 1/4 hp
Drilling in Steel: 3.15"
Drilling in Cast Iron: 3.98"
Tapping in Steel: 2.56"
Tapping in Cast Iron: 2.95"
Boring in Steel: 6"
Boring in Cast Iron: 10"
Dimensions and Weights
Max. Machine Height (F): 157"
Base and Column Height (G): 151.6"
Shipping Dimensions (L x W x H): 158" x 63" x 151.6"
Net Weight: 24,250 lbs.
Shipping Weight: 27,557 lbs.
* Equipped with hydraulic separate clamping unit. Vertical
movement of arm is coordinated by an IC timer. With a single
touch on push button switch, you can have the arm unclamped
then move vertically, or stop then clamp automatically. Very
easy to operate, and tools will always stay at the same
point after tool shifting
* Friction type disc clutch absorbs impact force caused by
vertical movement of spindle, and protects all transmission
units inside gear box. With quick spindle return, the clutch
will help speed-up the tapping operation
* Special automatic tool eject device is supplied to allow
you to change tools quickly. (No drifter is required)
Special arm elevating device is provided to prevent arm from
falling down abruptly after years of usage
* Coolant system
* CSA Electrics Standard
* Tool kit and manuals
TWO (2)-YEAR FACTORY WARRANTY INCLUDED!!
to complete inventory display
to our home page