Capacity Under Guides: 14 1/2"
Throat: 8 3/4"
Blade Travel: 9" Blade travel into work
Blade size: 3/4" Width x 8/12T x 10' Length .035 thick
Guards: Covers 4 step pulleys, blade and lower wheel
Guide Rollers for Blade Width: 1/4", 3/8", 1/2", 5/8" and
Blade Speeds: 70, 140, 270, 525 fpm
Table: Precision ground, cast iron table, 18 1/2" x 30"
Table Height: 30" from floor
Wheels: Cast iron, 14" x 1 1/8"
Wheel Tires: Replaceable rubber
Motor: 1 HP, 110/220V, 60-cycle single-phase;
1 HP 220/440V, 60 cycle three-phase
Dimensions: 30" Width x 66" Height x 40" Length
Shipping Weight: 650 lbs
The Vertical Band Saw that cuts Metals, Plastics and Woods
Safely and Efficiently!
Roll-In Saw built its reputation on the versatility and
durability of this terrific band saw - the EF1459, a.k.a,
"The Original." This was the first saw in America to use a
patented gravity-feed system that saves time and energy.
The EF1459 is actually a horizontal band saw on a vertical
frame. An all-purpose band saw, it handles all metals,
plastics, and woods in a wide variety of cuts. It is a
fast, accurate cut-off machine that is perfect for notching,
slitting, and slotting. A reliable addition to your shop
floor, this band saw doubles as a contour, profile, and rip
Accurate Gravity Feed:
The EF1459 band saw has a capacity of 14 1/2 inches under
the guides and a 9 inch cut. The blade and vertical column
travel on an inclined track that feeds into the cut in a
straight path. Gravity enables the blade to find its most
efficient feed rate. Counterweight control provides
adjustment for optimum cutting pressure and long blade life.
The work piece remains stationary and your hands need not
be in the cutting area during cut-off, an important safety
Hydraulic Feed Control and Blade Shield:
The Roll-In Saw Vertical EF1459 is equipped with a
hydraulic safety feed regulator and adjustable saw blade
guard. An adjustable stop can be pre-set to control the
depth that the blades travels into the work.
High Quality Yet Cost-Effective:
The Roll-In Saw Vertical EF1459 is equipped with a large,
rigid 18 1/2 inch x 30 inch precision-ground table.
Hardened grooved roller guides allow blades from 1/4 to
3/4 inch wide without adjustment. Blade wheels have rubber
tires to prevent blade blade slippage. The band saw comes
finished with an angle plate swivel work block, large
C-clamp, blade/speed selector chart, blade, one horsepower
motor and switch. It is available in either 110V or 220V
single-phase, or 220V or 440V three-phase options.
MADE IN THE USA SINCE 1940!!!!
to complete inventory display
to our home page