PROMACO, UNIVERSAL (SEE NXT PG, 4 VERSIONS AVAILABLE), MODEL#RBM 2-30 **NEW**   Our stock number: 870

PROMACO, UNIVERSAL (SEE NXT PG, 4 VERSIONS AVAILABLE), MODEL#RBM 2-30 **NEW**

Model: PROMACO RBM-230

MATERIAL: DIMENSIONS: MIN. I.D.: REQUIRED TOOLING:

Flats, Hard: 3/4" X 1/4" 14" Standard Rolls
Flats, Hard: 2" X 3/8" 16" Standard
Flats, Hard: 2-1/2" X 1/4" 30" Standard
Flats, Easy: 3" X 5/8" 14" Standard
Flats, Easy: 5" X 3/8" 13" Special
Square Bar: 1-1/8" 24" Standard
Square Bar: 1/2" 3" Special
Angle, Legout: 1" X 1" X 1/4" 17" Standard
Angle, Legout: 1.5" X 1.5" X 3/16" 16" Special
Angle, Legin: 1" X 1" X 1/4" 20" Standard
Angle, Legin: 1.5" X 1.5" X 3/16" 21" Special
Tee, Legout: 1.5" X 1.5" X 1/4" 12" Standard
Tee, Legin: 1.5" X 1.5" X 1/4" 20" Standard
C, Legout: 2" X 1" X 3/16" 12" Standard
Round Bar: 1-1/4" 24" Special
Pipe, SCH 40: 1" Sched 40 Pipe 12" Special
Pipe, SCH 40: 1.5" Sched 40 Pipe 18" Special
Round Tube: 3/4" X 16 Gauge Tube 12" Special
Round Tube: 2-3/8" X 16 ga Tube 48" Special
Square Tube: 1" X 1" X 11 Gauge 25" Standard
Square Tube: 1.5" X 1.5" X 11 ga. 40" Special
Rect. Tube: 2" X 1" X 11 Gauge 48" Special

SPECIFICATIONS:
Electric Motor Rating (0.75 KW): 1 HP
Power Requirement 220 Volt, 3 PH: 3.7 AMPS
Power Requirement 440 Volt, 3 PH: 1.8 AMPS
Power Requirement 220 Volt, 1 PH: 5.9 AMPS
Shaft Diameter: 30MM
Shaftspeed: 6.5RPM
Number of Driven Shafts: 2
Number of Adjustable (Or Form) Rolls: 1
Width: 26 Inches
Depth: 22 Inches
Overall Height: 51 Inches
Approximate Pass Line: 40 Inches
Net Weight: 350 lbs.
Gross (Shipping) Weight: 500 lbs.


FEATURES:
* Rugged Steel Frame.
* Bi-Directional Drive Motor 220 Volt, 3 PH -10:1 Gear
Reduction Unit, Operating in Constant Oil
Bath.
* High Strength Steel Shafts, Powered By A Spur Gear Drive.
* Forming Roll Guide Block Traveling on Hardened Slide Ways.
* Roll Shafts Journaled Tapered Roller Bearings, Greased &
Sealed For Life
* Two Adjustment Scales For The Depth Adjustment of The
Forming Roll.
* Two Laterally Mounted, Adjustable Guide Rollers.
* Main Power on/off Switch and Three Position Selector
Switch For Directional Control of The Electric Motor.
* Set of Shims For clearance Adjustment of The Standard
Rolls.
* 18 Piece Standard Roll Set is Included.
* Machine STand Is Included, With Generous Tooling Storage
Space.


The RBM 2-30 is suitable for rolling a wide variety of
materials, including structural and stainless steels, as
well as, copper, aluminum and brass.

The machine is furnished with a standard or "Universal" Roll
set, consisting of eighteen roll discs. Each of the
machine's three shafts is equipped with two large discs and
four smaller spacer discs, of varying thickness (18 Pieces
in all). This system allows the machine operator to
"Construct" the dies that are required to roll many shapes
and sizes of materials, according to the sequence in which
the discs are installed on the roll shafts. Therefore, the
need for special tooling is eliminated on rolling
applications such as, flat bar, square bar, channels, tees,
box tubing and most angles. Round mechanical tubing and
schedule 40 pipe may also be rolled, however, these
applications require optional tooling where the dies conform
to the O.D. of the material being rolled. Custom roll sets,
for extruded shapes or molded caps, are also available upon
request.

For the rolling of molded cap rails, promaco offers special
die sets. These sets consist of two components. The first is
a Delrin "Insert", which actually comes in contact with the
molded cap. Delrin is a hard, durable synthetic, which
resists material pick-up and, thereby, prevents the cap rail
from being marred during the rolling process. The Delrin
inserts are machined to the exact shape of the molded cap
rail that each customer is using. Popular caps such as the
Blum 4530 or Braun 1244 S are usually available from stock.
Other styles can be delivered within ten working days.
Tubing in the shape of molded cap rail may also be rolled
with this tooling. The second component of the cap rail die
set is the steel support disc. Support discs are employed
to "Sandwich" the Delrin inserts to prevent their edges from
fracturing due to side loading during the rolling process.
These discs may also be used for rolling 12" box and 2" X 1"
rectangular tubes.

Although we recommend that inserts conform to the shape of
the specific rail being rolled, the support discs may be
used with any set of inserts.




Get a Quote

Company:
Contact:
Email:
Tel:
Address:
City St ZIP:
Fax:

How did you hear of us?
Additional information on your request:
   

Please enter text from above:

RETURN to complete inventory display       RETURN to our home page