Model: Trimmaster IV (14' Model# IT1-463)
Length: 14' 6"
Capacity: 20 ga. Mild Max / 24 ga. Recommended
# Casting: 15
Weight: 206 lbs.
Trim Coil, Aluminum: .040" Recommended / .063" Max
Gutter Coil: .032" Recommended / .032" Max
Galvanized, Grade D: 24 Gauge Recommended / 20 Ga. Max
Galvanized, Grade E: 24 Gauge Recommended / 24 Ga. Max
Copper, 1/4" Hard: 32 OZ. Recommended / 36 Oz. Max
* Heavy-duty extruded aluminum shop stand included with
every Mark IV. The Xtreme Shop Stand will not rock, rattle,
roll or rust. Unit is fully detachable and collapsible for
easy fast setup and transport.
* Hollow-core fixed hinge, bending hinge and base rail
design makes this one tough brake. New FTA system (Fine-
Tune Adjustment), means you still have control over
adjusting your machine, though you may never need to.
* Mark IV Industrial TrimMaster has the strongest bending
capacities you can get in a portable brake.
* Unique Cam-Locking system locks to the thickness of the
* Full loop locking and bending handles are ergonomic and
provide for single operator use.
* Heavy-duty hinge provides years of dependable service
without material curling at the ends or sags in the center.
* Mark IV Industrial now works with TrimCutter for quick
clean material cutting right on the brake. TrimCutterT does
not ride off the brake during the cut.
* POWERSLOT technology gives you more bending power with
less energy resulting in a truly unique bending experience.
Added walls and hollows make TrimMaster brakes the toughest
machines out there while providing the same long service
life you've come to expect from a Van Mark Product.
* QUICK-CONNECT HANDLES
Attach and detach quickly for easy transport and setups.
Faspins insert easily and stay in place during all phases of
* VAN MARK TUNE-UP KITS
are a great way to keep your machine working in tip top
condition. With the longest service life of any portable
brake in the business, it's nice to know support and
preventive maintenance parts are always available when and
if you need them.
* BEND WITH CONFIDENCE
New POWERslot technology not only provides increased bending
lev-erage, clad finishes are also protected from marring and
scratching during bend.
TrimCutter: Uses a unique 4-point track bearing system to
ensure tool doesn't ride off the brake during cut. Low
profile grip area allows you to direct power along the plane
of the cut resulting in one smooth motion that leaves
factory edges every time. This tool pays for itself after
just 1 job!
QuickScore: Model 3016 scores material along the outer edge
of the brake allowing downward separation and as you lift
the piece up, it snaps right off into your hands where you
need it. Tool uses standard utility blades.
Coil Dispenser: Feeds material into most brakes with
TrimCutter allows you to cut exact lengths into the brake.
TrimFormer: Model 3015 gives you the ability to strengthen
and beautify ordinary trim work into designs that will
distinguish your workmanship from all others. Brick Mold
and Rib Forming dies comes standard.
to complete inventory display
to our home page