14" x 40" cc, KENT ENGINE LATHE, MODEL#KLS-1440 **NEW**   Our stock number: 4565

14 x 40 cc, KENT ENGINE LATHE, MODEL#KLS-1440 **NEW**

Model: KLS-1440
Swing over bed: 14" (356 mm)
Swing over cross slide: 8-5/8" (220 mm)
Swing over gap: 20" (506 mm)
Width of bed: 8 1/8" (206 mm)
Distance between centers: 40" (1000 mm)
Cross slide travel: 7" (180 mm)
Top slide travel: 4" (100 mm)
Spindle speeds: 16 speeds (2 ranges)
Spindle speed range: 45-1800 RPM
Through hole diameter: 1-1/2" (38 mm)
Spindle nose: D1-4 camlock
Spindle bore taper: MT #5
Standard (Whit-worth): 40 (4-112) TPI
Metric pitch: 22 (0.45-7.5) MM
Longitudinal feeds: 0.0012"-0.0294" IN/REV
Cross feeds: 0.0004"-0.0108" IN/REV
Leadscrew diameter: 7/8" (22 mm)
Thread pitch: 8 TPI
Quill travel: 4-3/4" (120 mm)
Quill diameter: 1-25/32" (45 mm)
Quill bore taper: MT #3
Main motor: 3 HP (2-speed, 3-phase)
Coolant pump motor: 1/8 HP (3-phase)
Overall dimension: 76" x 29" x 47" (LxWxH)
Packing dimension: 80" x 35" x 61" (LxWxH)
Net weight: 1650 lbs
Gross weight: 1950 lbs
Power Requirements: 220 Volts, 60 Hz, 3-Phase, 10 Amp.


SPECIAL ACCESSORIES PACKAGE -- INCLUDED WITH LATHE -- NO
EXTRA CHARGE!
3-jaw chuck (6"), 4-jaw chuck (8"), Face plate (12")
Steady rest, Follow rest, 4-position tool post
Coolant system, Full-length splash guard, Worklight
Micro carriage stop, Thread chasing dial
Toolbox with standard tools


FEATURES:
* 3 HP main spindle motor
* 16 speeds, all geared headstock
* Jog button for easy gear changes
* Hardened and ground gears and bedways
* Cast iron machine bedways and base
* Removable chip pan for easy clean up
* Foot brake and T-Slot compound Inch/metric reading on
dials
* Inch/metric ruler on tailstock quill
* ISO 9001 certified manufacturer

OPTIONS AND ACCESSORIES:
Acu-Rite 200S DRO (2-axis, x=0.0001"/z=0.0002" res)



Mitutoyo DRO (2-axis, x=0.0002"/z=0.0005" res)
DRO installation charge

Aloris BXA #2-BS set (tool post plus 4 bars)
5C lever style collet closer
Royal spindle type live center
Live center set with interchangeable tips
BTC 3-jaw chuck w/back plate (Zero-set, 6" D1-4)

BTC 3-jaw chuck w/back plate (Zero-set, 8" D1-4)
Transformer for 440v power (3 KVA)
3HP Phase converter for single phase power (rotary-type)
Prolong Ultra-Cut coolant (2.5 gallon, mixes 1:30)
Prolong Anti-Friction lubricant (1 quart, mixes 1:10)


*Please note: Installed options may require a deposit,
which is non-cancelable and non-refundable.




Get a Quote

Company:
Contact:
Email:
Tel:
Address:
City St ZIP:
Fax:

How did you hear of us?
Additional information on your request:
   

Please enter text from above:

RETURN to complete inventory display       RETURN to our home page