Table Size: 27" x 23.5"
Table Dimensions: 37.4" x 31"
Motor: 4 hp
Notch Angle: 30 - 140 Variable
Strokes Per Minute: 15
Blade Gap Adjustment: Manual
Max. Capacity: .237"
Max. Capacity Mild Steel (SS capacity with optional blades):
4 ga. (7 ga.)
Power: 220V / 3-phase
Shipping Weight: 1,100 lbs.
Shipping Dimensions: 60" x 44" x 68"
Max Notch Dimensions: 8-1/2" x 8-1/2"
Ever have odd angles that you need to notch out of sheet
metal, something that will look totally whack when finished
if not done right? Enter the SN-V04-MS; this great machine
is a 220 volt three phase hydraulic sheet metal notcher.
This notcher will cut notches from 30 to 140 degrees in mild
steel up to 6mm in thickness and will do this at up to 15
strokes per minute.
The oversized 27" x 23.5" table includes table guides and
miter blocks to ensure accurate notches every time. The SN-
V04-MS sheet metal notcher has 8.5" long blades that are
negatively raked to pull the material to the stops during
the cut. The blades can also be resharpened many times for
even more life and cost savings.
Blade gap is adjusted with the use of hand wheels and the
notching stroke is controlled by a foot pedal.
to complete inventory display
to our home page