Roll Adjustment: Hydraulic
Pipe Capacity: Size: 4.5" (sch. 40) / Min. Dia.:73"
Round Tube Capacity: Size: 5.5" (.120") / Min. Dia.: 118"
Square Tube Capacity: Size: 4" (.196") / Min. Dia.: 118"
Solid Round Capacity: Size: 2.375" / Min. Dia.: 40"
Flat Bar Easy Way: Size: 7.875" (1.375") / Min. Dia.: 40"
Flat Bar Hard Way: Size: 4" (.984") / Min. Dia.: 63"
Angle Iron Capacity: Size: 4" (.393") / Min. Dia.: 63"
Shaft Diameter: 3.937"
Lower Roll Dia.: 12.40"
Digital Readout: Yes
Power: 220V / 3-phase
Shipping Weight: 4,975 lbs.
Need production from your ring rolling machine? With its 4-
1/2" schedule 40 pipe capacity, the R-H120 is the machine
you want. The double pinch design of the R-H120 helps
minimize those money wasting pieces of straight that are
commonly found at the start and finish of the bend by
allowing the operator to pre and post bend the material.
The R-H120 is considered a double pinch roll bender since
the top roll is fixed and the two bottom rolls are on
independent hydraulic cylinders to do the forming.
The R-H120 double pinch metal ring roller from Baileigh
Industrial has powerful industrial grade hydraulics that
drives all three rolls on this roll bender. The R-H120 has
lateral roll guides and guide rolls that are hydraulically
driven to assist with coiling and twisting. The R-H120 has
a heavy duty steel plate frame that is bolted and welded to
ensure no flex when bending at full capacity.
This ring roller can be operated in the vertical and
horizontal position depending on what OD and size material
needs to be rolled. A movable operator control pendant
houses all control buttons including the digital readout for
the roll positions and foot pedals for direction of
operation. This metal ring roller offers one of the best
designs on the market and is built with only the highest
to complete inventory display
to our home page