4' x 10", JET RADIAL ARM DRILL, STK#320034, MODEL#J-1100R **NEW**   Our stock number: 7944

4' x 10 , JET RADIAL ARM DRILL, STK#320034, MODEL#J-1100R **NEW**

Model: J-1100R
Stock Number: 320034
Motor: 1-1/2 to 3 HP, 230V, 3 Ph
Number of Spindle speeds: 12 (44-1500)
Spindle Taper: MT-4
Max Distance Spindle to Table ( in.): 33-21/32
T-Slots Number and Size (in.): 3 & 3/4
Column Diameter (in.): 10-1/4
Drilling Capacity Cast Iron (in.): 2-1/4
Drilling Capacity Mild Steel (in.): 1-3/4
Tapping Capacity Cast Iron (in.): 1-1/4
Tapping Capacity Mild Steel (in.): 1
Boring Capacity Steel (in.): 3-3/8
Boring Capacity Cast Iron (in.): 4-3/4
Distance Column to Spindle (max/in.): 43-5/16
Distance Column to Spindle (min/in.): 9-5/8
Travel of Head Horizontal (in.): 32-1/4
Distance Base to Spindle (max/in.): 50
Distance Base to Spindle (min/in.): 18-1/2
Arm Travel Vertical (in.): 22-7/16
Quill Travel (in.): 9
Quill Travel w/ Powerfeed engaged (in.): 8-21/32
Quill Down feed Rates (IPR): 3 (.002, .004, .006)
Elevating Motor: 1 HP
Base Dimensions (in.): 67-3/4 X 28 X 6-1/2
Coolant Pump Motor: 1/8 HP
Table Dimensions (in.): 24-3/4 X 20-1/2 X 16-1/2
Overall Dimensions: 74 x 34 x 89
Height: 89 inch
Width: 34 inch
Length: 74 inch
Net Weight: 4190 pound

* The power train gears and spline shaft are made of the
finest quality, heat treated and ground nickel-chrome steel,
giving extra strength and smoothness to high torque loads
* The spindle is made of the finest case hardened steel
for extra strength and wear
* The spindle is supported by double row taper roller and
thrust ball bearings at the nose, with thrust and radial
axis bearings at the top
* The spindle is built to withstand exceptionally heavy
drilling and boring loads and to insure maximum accuracy
* Push button controls are all reduced to 110V
* Electrical circuits are located in the built-in control
box at the rear of the arm- this keeps the contols dust and
humidity free while making them easily accessible for
* Entire frame is made of Meehanite and high tensile
strength cast iron to handle the heaviest of jobs
* Arm raising safety device prevents arm from dropping
* Counter balanced mechanism for spindle return
* 12 speeds/3 feed rates make exotic materials easier to
drill, bore and tap
* Centralized control center
* Automatic tool ejector
* Independent arm manual clamping system, which locks and
unlocks head and column

* Built in work light
* Coolant pump
* Tool kit
* Box table


Get a Quote

City St ZIP:

How did you hear of us?
Additional information on your request:

Please enter text from above:

RETURN to complete inventory display       RETURN to our home page