4' x 12", JET RADIAL ARM DRILL, STK#320036, MODEL#J-1230R **NEW**   Our stock number: 7946

4' x 12 , JET RADIAL ARM DRILL, STK#320036, MODEL#J-1230R **NEW**

Click on picture below for larger version
4' x 12 , JET RADIAL ARM DRILL, STK#320036, MODEL#J-1230R **NEW**4' x 12 , JET RADIAL ARM DRILL, STK#320036, MODEL#J-1230R **NEW**4' x 12 , JET RADIAL ARM DRILL, STK#320036, MODEL#J-1230R **NEW**
4' x 12 , JET RADIAL ARM DRILL, STK#320036, MODEL#J-1230R **NEW**4' x 12 , JET RADIAL ARM DRILL, STK#320036, MODEL#J-1230R **NEW**4' x 12 , JET RADIAL ARM DRILL, STK#320036, MODEL#J-1230R **NEW**

Model: J-1230R
Stock Number: 320036
Motor: 2-1/2 to 5 HP, 230V, 3 Ph
Number of Spindle speeds: 12 (44 - 1500)
Spindle Taper: MT-4
Max Distance Spindle to Table ( in.): 37-1/2
T-Slots Number and Size (in.): 3 & 3/4
Column Diameter (in.): 11-13/16
Drilling Capacity Cast Iron (in.): 2-5/16
Drilling Capacity Mild Steel (in.): 1-7/8
Tapping Capacity Cast Iron (in.): 1-1/2
Tapping Capacity Mild Steel (in.): 1
Boring Capacity Steel (in.): 3-3/8
Boring Capacity Cast Iron (in.): 4-3/4
Distance Column to Spindle (max/in.): 46
Distance Column to Spindle (min/in.): 13-3/4
Travel of Head Horizontal (in.): 35
Distance Base to Spindle (max/in.): 54
Distance Base to Spindle (min/in.): 19-3/8
Arm Travel Vertical (in.): 35
Quill Travel (in.): 9-7/8
Quill Travel w/ Powerfeed engaged (in.): 9-7/16
Quill Down feed Rates (IPR): 3 (.002, .004, .006)
Elevating Motor: 1HP
Base Dimensions (in.): 67-3/4 x 28 x 7
Coolant Pump Motor: 1/8 HP
Table Dimensions (in.): 25 x 20-1/2 x 16-5/16
Overall Dimensions: 80 x 39 x 89
Height: 88.5 inch
Width: 39.25 inch
Length: 79.75 inch
Net Weight: 4520 pound


FEATURES:
* The power train gears and spline shaft are made of the
finest quality, heat treated and ground nickel-chrome steel,
giving extra strength and smoothness to high torque loads
* The spindle is made of the finest case hardened steel
for extra strength and wear
* The spindle is supported by double row taper roller and
thrust ball bearings at the nose with thrust and radial axis
bearings atthe top
* The spindle is built to withstand exceptionally heavy
drilling and boring loads and to insure maximum accuracy
* Push button controls are all reduced to 110V
* Electrical circuits are located in the built-in control
box at the rear of the arm- this keeps the contols dust and
humidity free while making them easily accessible for
maintenance
* Entire frame is made of Meehanite and high tensile
strength cast iron to handle the heaviest of jobs
* Arm raising safety device prevents arm from dropping
* Counter balanced mechanism for spindle return
* 12 speeds/3 feed rates make exotic materials easier to
drill, bore and tap
* Centralized control center
* Automatic tool ejector
* Independent arm manual clamping system, which locks and
unlocks the head and column

STANDARD EQUIPMENT:
* Built in work light
* Coolant pump
* Tool kit
* Box table


2-YEAR FACTORY WARRANTY INCLUDED!!


Get a Quote

Company:
Contact:
Email:
Tel:
Address:
City St ZIP:
Fax:

How did you hear of us?
Additional information on your request:
   

Please enter text from above:

RETURN to complete inventory display       RETURN to our home page