28" JET DIRECT DRIVE DRILL PRESS, STK#354050, MODEL#J-2350 **NEW**   Our stock number: 7949

28 JET DIRECT DRIVE DRILL PRESS, STK#354050, MODEL#J-2350 **NEW**

Click on picture below for larger version
28 JET DIRECT DRIVE DRILL PRESS, STK#354050, MODEL#J-2350 **NEW**28 JET DIRECT DRIVE DRILL PRESS, STK#354050, MODEL#J-2350 **NEW**28 JET DIRECT DRIVE DRILL PRESS, STK#354050, MODEL#J-2350 **NEW**
28 JET DIRECT DRIVE DRILL PRESS, STK#354050, MODEL#J-2350 **NEW**28 JET DIRECT DRIVE DRILL PRESS, STK#354050, MODEL#J-2350 **NEW**28 JET DIRECT DRIVE DRILL PRESS, STK#354050, MODEL#J-2350 **NEW**

Model: J-2350
Stock Number: 354050
Motor: 3 HP, 230/460V, 3 Ph, Prewired 230V
Number of Spindle speeds: 9
Range of Spindle Speeds (RPM): 82, 120, 180, 240, 354, 528,
678, 1026, 1524
Spindle Taper: MT-4
Quill Diameter (in.): 3.228
Max Distance Spindle to Table ( in.): 30-1/2
T-Slots Number and Size (in.): 3 x 5/8
Work Table Weight Capacity (lbs.): 400
Base Dimensions (LxWxH/ in.): 102 x 25 x 47
Drilling Capacity Cast Iron (in.): 1-7/8
Drilling Capacity Mild Steel (in.): 1-3/4
Tapping Capacity Cast Iron (in.): 1-3/4
Tapping Capacity Mild Steel (in.): 1-9/16
Quill Travel (in.): 9
Quill Travel w/ Powerfeed engaged (in.): 9
Quill Down feed Rates (IPR): .004, .008, .012, .016
Table Size (in.): 22 x 19
Distance Column to Spindle (in.): 14
Drills to Center of Circle (in): 28
Spindle Distance to Base (in.): 49
Max Distance - Spindle to Table (in): 30-1/2
Spindle Travel (in.): 9
Number of Powerfeeds: 4
Base Slots Number & Size (in.): 2 x 5/8
Table Dimensions: 22 X 19
Spindle Distance to Table (max./in.): 30-1/2
Spindle Distance to Table (min./in.): 2.67
Height: 46.5 inch
Width: 24.5 inch
Length: 102 inch
Net Weight: 1810 pound


FEATURES:
* Direct drive round column drill press with mechanical
clutch
* Two speed forward and reverse switch
* Mechanical powerfeed clutch engagement
* Heavy duty quill and spindle
* Tempered, ground spindle with internal taper mounted in
precision bearings for maximum accuracy, minimizing
deflection
* Speed and feed selectors are located on one side of the
drill head for convenience and ease of operation
* Oversized base is precision ground with T-slots for
added versatility and stability
* Spindle gear box is equipped with steel hardened,
ground, shafts and gears
* Spindle gear box is internally lubricated in a
continuous oil bath for long term smooth operation.
* Tilting table, 45 left and right
* Powerfeed can be disengaged manually

STANDARD EQUIPMENT:
* Automatic tool ejector
* Manual quill lock
* Coolant system
* Low voltage at switch


2-YEAR FACTORY WARRANTY INCLUDED!!




Get a Quote

Company:
Contact:
Email:
Tel:
Address:
City St ZIP:
Fax:

How did you hear of us?
Additional information on your request:
   

Please enter text from above:

RETURN to complete inventory display       RETURN to our home page