PIRANHA 140-TON SINGLE-OPERATOR IRONWORKER, MODEL#P140 **NEW**   Our stock number: 10016

PIRANHA 140-TON SINGLE-OPERATOR IRONWORKER, MODEL#P140 **NEW**

MODEL: P-140 SINGLE OPERATOR IRONWORKER

THROAT DEPTH: 12"
OPEN HEIGHT: 15-1/2"
CLOSED HEIGHT W/O DIE BLOCK: 10-1/4"
STROKE LENGTH: 5-1/4"
PLATEN TABLE SIZE (D-W): 14-1/2" X 21"
PUNCH HOLE SIZE (MAX. MATERIAL) MAX. HOLE SIZE (MATERIAL:
140 TONS 1-3/4" (1") 5" (5/16")
PLATE SHEAR: 20-1/2" LONG 1" X 14" 3/4" X 18" 1/2" X 20"
ANGLE SHEAR: 6" X 6" X 5/8"
BAR SHEAR ROUND (MIN. TO MAX.) SQUARE (MIN. TO MAX.):
1/2" TO 2" 1/2" TO 1-3/8"
COPER-NOTCHER (TONS) (MAX.): 95 4" X 6" X 3/8"
BENDING ATTACHMENT (OPTIONAL): 12", 24"
PUNCH END-STROKES PER MINUTE OPTIONAL SPEED-UP KIT: 30 @
3/4" 35 @ 3/4"
WORK STATION HEIGHT APPROX." 44"
HYDRAULICS PUMP GPM SYSTEM R/V PSI: 15 3500
FLUID CAPACITY (GAL.): 25
MOTOR STD. 230/460 3 PH. 1800 RPM OPT PHASE & VOLTAGE
AVAILABLE: 15 HP 3 PH.
DIMENSIONS (NET) W-L-H APPROX.: 35" X 90" X 68-1/2"
WEIGHT (NET) LBS. APPROX.: 6200

With 140 tons of punching force, the Piranha Model P-140 is
truly the king of single operator ironworkers.

The P-140 has more standard workstations than any other
ironworker in its class. This includes punching, bending,
bar shear, angle shear, round bar shear, and an integrated
coper/notcher.

The P-140 also has a dovetail slide that allows an operator
to switch from punching to bending in just a few seconds.

The P-140 has full electrical control of its stroke with a
footswitch and limit switch stroke controls for fast
punching cycles.

The no slug-loss shearing saves material, keeps the machine
area cleaner, and offers larger material capacity than the
competition. A wide variety of optional tooling is available
to enhance the P-140's capabilities.

Piranha's incomparable integrated coper/notcher station
outperforms any other ironworker. Notch from thick to thin,
remove the full leg from angle iron, shave even the smallest
piece from the end of the work piece, and maintain total
control of the part - from any angle.

Standard Features

Complete Punching Attachment with split dove tail mounting
5 Punch and Die sets
Automatic Urethane Hold Down on the Punch Stripper and on
Angle, Plate and Bar Shear
Front and rear 5 position joy stick controls (electric) with
jog up & down, fast up & down, neutral
Remote Electric Foot Switch that can be connected at either
end of the machine
Electric Limit Switches that can be set for stroke control
when using foot control
Set of Round Bar Knives [2 way] (customers choice to 2)
Set of 16.625 Plate Shear Knives [4 way]
Set of 20.5" Plate Shear Knives [4 way] (instead of Round
Bar Knives and 16.625" Plate Shear Knives)
Extra Blank Knife to extend shear to 20.5"
Set of Angle Knives [8 way top] [4 way bottom]
Set of Coper Knives [2 way top] [4 way bottom]
Chip Buckets (2 each)
Extra Oil Filter
Coupling Wrench & 3/8" Allen Wrench
Integral Lifting Lug for instant portability


















































Get a Quote

Company:
Contact:
Email:
Tel:
Address:
City St ZIP:
Fax:

How did you hear of us?
Additional information on your request:
   

Please enter text from above:

RETURN to complete inventory display       RETURN to our home page