165 Ton, HACO, No. SRM 165-12-10 CNC HYDRAULIC **NEW**

Full Product Description

MODEL:   SYNCHROMASTER SRM 165-12-10

Tonnage:   165 Tons
Capacity:   165 Tons
Overall bending length:   144"
Clear distance between housings:   124"
Maximum stroke (programmable):   7.8"
Throat:   9.8"
Open height:   15.7"
Electric motor:   20 HP
Voltage:   220/440VAC
Rapid approach speed:   236"/min
Maximum press speed:   24"/min
Rapid return speed:   236"/min
Length:   162"
Overall height:   101"
Front/back:   67"
Table height:   36"
Weight:   20,500 lbs


The HACO "SYNCHROMASTER" press brake described in this quote

has all the functions and precision of a high-end CNC press

brake, but uses a very simple and easy to program CNC

control, made in house by HACO.

HACO-ATLANTIC, Inc., member of HACO International, builds

SAFE machines conforming to ANSI B11.3 "American National

Standard for machine tools -power press brakes- safety

requirements for construction, care and use."  We deliver

our machine with a safety handbook, as well as interfacing

capabilities for owner installed safety devices.  Due to the

multiple purposes of a press brake, point of operation

guards should be installed by the purchaser in accordance

with Federal Safety Requirements.

Bringing the "Synchromaster" in your shop, means improving

your bending production and bending precision. The

"Synchromaster" press brake is a very user friendly and

versatile machine and comes standard with the HACO ATS550

CNC controller.

Your company will gain customer confidence resulting from

the ACCURACY the HACO Press Brake offers you.  Our

synchronized bed referenced linear scale design guarantees

bending accuracy only limited to material differences or

tooling inaccuracies.

Most importantly, your machine will be DEPENDABLE.  The

machine is built with top quality components and

craftsmanship of very dedicated and experienced press brake

builders.

We are confident that a decision to purchase a SYNCHROMASTER

Series Press Brake will be one of your company's wisest

business decisions.

CONSTRUCTION
The frame of the machine is built with rugged high quality

steel plates, interlocked and welded for maximum strength

and minimum deflection.  All frames are stress relieved

after welding to ensure near perfect surfaces, which will

result in more accurate bending.  The welded construction

also resists torque twist that is sometimes found in bolt-

together designs.

The machine does not require a concrete pit or any special

foundation. Forces can be requested from our office to check

if your existing concrete slab will do.

The SYNCHROMASTER press brake uses separate thick steel

plates for ram and bed of this machine. The ram has more

tool clamping plates and bolts than most of our competitors. 

By offering more tool clamps, we ensure a safe and secure

clamping of small tool segments. The bed is a very important

part of the machine, and is integrated in the total frame

structure design. We machine the bed together with ram and

cylinder positions, all in one setup to ensure perfect

alignment between ram, bed and frame for guaranteed

accuracy.

The bed has a removable table, which can be re-machined in

the event of accidental overload damage or wear from the

tooling.  Our service engineer can crown the table for

longer parts, but we do recommend purchasing our adjustable

crowning table. A full-length die slot is machined in the

table and has set screws over the full length of the table

to clamp the die holder.

The side frames of the brake come with large throat gaps to

clear working space. Bigger side frame gaps can be requested

for a more price.

The SYNCHROMASTER comes standard with American style tool

holders.  European (Amadar) style tool holders with built-in

wedge system can be installed as an option as well as

hydraulic upper tool clamping.

The use of non-metallic gibs prevents galling of the bearing

surfaces and permits minimum clearances for accurate ram

guidance.
The control box of the machine is connected to a rotating

pendant arm. The keyboard of the controller uses an

industrial foil cover, resistant to oil, grease and dirt.

The cylinders are manufactured by HACO, and use Parker

Polypac and wiper seals.  Most hydraulic valves are

connected to a manifold block to minimize the amount of

hoses and pipes to prevent hydraulic leaks over time.  The

hydraulics are located on top of the machine, free from

parts and dirt. The hydraulic design is easy to service and

the machine comes with a full hydraulic fluid tank.  The

hydraulics on the SYNCHROMASTER are simple, yet accurate and

most important dependable.  The system has a built-in safety

relief valve.  If an attempt is made to bend material over

the capacity of the press brake, the machine will

automatically open the safety relief valves to release

pressure and prevent machine overloads.
COMPONENTS
Most hydraulic and electric components are standard

industrial/commercial grade, off-the shelf items from major

manufacturers such as Parkerr, Vickersr or Rexrothr

hydraulics and Telemecaniquer or ABBr electrics.

Remote foot switch with hand grab, dual foot pedals for ram

control. Second foot pedal and two- hand control are offered

as an option.


CONTROL 
This machine comes standard with the HACO ATS550 three axis

control. 

The ATS550 is an easy to program, low cost control for metal

fabricators in need of a very easy-to-use but efficient CNC

machine.

Important:  This control is only programmable in depth! When

ordering tooling from your supplier, please make sure you

order Air Bending Tooling (88 Degrees or less).

Features:
- Automatic backgauge positioning (X-axis)
- Automatic ram positioning (Y1/Y2 axes) with linear scales -

+/- .0004" ram repeatability
- +/- .004" back gauge repeatability 
- Memory: 200 programs with 400 steps in total - Jog mode

for backgauge
- Jog mode for the ram depth with zero accept & teach in

accept mode - Programmable speed change-over point
- Programmable ram stroke
- Electronic pressure adjustment and read out - Electronic

part counter


The ATS550 has 2 work modes: 
1) Manual mode:
The operator enters a backstop dimension and a depth

dimension.  Both axes position automatic to the entered

values.  The required tonnage can be entered to protect the

machine against overloads.  On the display you can see the

backgauge or depth position and tonnage read out.

2) Automatic mode:
The operator can enter several backstop dimensions and

depths up to 8 steps.  When you run the program, the control

follows the different steps of the program.  The operator

can follow the different steps on the display of the

control. 



BACK GAUGE UNIT
The machine comes standard with a 31" single axis, high-

speed backgauge (X-axis). The standard back gauge has the

following features:

- The X-axis comes standard with programmable position

(0.004" accuracy) and manually adjustable finger height and

finger width.

- The motor uses an optical encoder to ensure a very high

positioning accuracy.
    
- A steel dovetail gauge bar spans the distance between side

frames, allowing the finger blocks to be positioned and

fastened along the
full length of this bar.

- Two gauge finger blocks are manually adjustable in height

(3.937") adjustable in height (3.937") to accommodate

different V-die heights.  An elevating screw, adjustable by

hand wheel, provides accurate height positioning.  

- Over travel of the backstop is avoided by the use of limit

switches and software limits in the CNC control.

- Back gauge X-axis automatically references at the initial

startup (home position).

- Retraction of the backgauge for Z-bending is fully

programmable.


GENERAL
- Machine can be wired for 220 or 440V, 3 phase, 60Hz
- A full tank of hydraulic oil and service tools included.
- One safety, operator and service manual included.
- One year warranty on spare parts and labor, except

tooling.  Warranty shall be considered void if the machine

is not used in a normal and proper manner, not properly

maintained, or modified for any special use.  No other

warranty is either expressed or implied by HACO-ATLANTIC,

Inc. or any of its representatives.  For the sake of its

expediency involving a minor failure, HACO-ATLANTIC, Inc. 

may at its option allow the user to purchase a needed part

locally for which he will be reimbursed upon return of the

defective part.

**Installation, start up and training are included. 




OPTIONAL EQUIPMENT
Filler block 12' L x 3-1/4" H x 3" W   $1,800.00

Manual adjustable crowning table   *$7,090.00

System style quick manual top clamping & manual bottom

clamping   $5,190.00
(to accept Amada style tooling)

More price for hydraulic System style top clamping$9,930.00

29" front support arm with 2 T-slots and 1 tilting stop

$375.00/each

Additional tilting stop for front support arm   $65.00/each

Additional tilt stop w/micrometer adjust for front support

arm   $210.00/ea 
Adjustable front support system includes:   *$10,500.00
  - two 29" front support arms with 2 T-slots and 1 tilting

stop
  - manually adjustable in width along full length of the

machine
  - manually adjustable in height with hand wheel

Extra front support for above front support system

*$4,410.00/ea

T-slot in bed, price per side   *$1,070.00

Second foot pedal in series with standard pedal  $1,130.00

Emergency stop button in specified location   $295.00

Two hand control   *$3,500.00

18" Triad Superlight V, Infrared light curtain system

$2,650.00
   Model TR-18-4F-15 - _" spaced light beam
  - one beam floating blank capacity

Triad swing mount brackets, model 9000, price per pair

$895.00

Atlantic fixed mount brackets, price per pair   $750.00

Extra operator's manual   $70.00

* indicates factory installation only



BACK GAUGE OPTIONS
More price for 39" back gauge in lieu of standard 31"

*$495.00

More price for extra finger block   *$1,000.00

More price for (2) tiltable fingers in lieu of std.*$440.00


This list only shows the most common options, please contact

us for information on additional options.  Prices of

optional equipment are valid only if ordered with the

machine.  For separate orders, please contact us.  
* indicates factory installation only



GENERAL CONDITIONS
Payment Terms: 20% with order, 80% upon installation.

FOB: HACO-ATLANTIC warehouse, Houston  TX

Delivery Terms:  Upon request

Validity of Offer: 90 days from November 11, 2002.