100 Ton, PRIMELINE 10' DOWNSTROKING HYDRAULIC CNC PRESS BRAKE **NEW**


This product is no longer available.


Reference Number: 5772

Condition: New


"If you need a machine and don't buy it, then you will ultimately find you have paid for it but don't have it."   Henry Ford

Full Product Description

MODEL:   10' X 100-TON

Specifications:
Capacity - tons:   100
Bending length - overall:   122.04"
Distance between housings:   100.39"
Stroke - adjustable:   7.48" (Including screw adjustment)
Speeds of ram - inches per second:
Approach - 3.94
Bend - .35
Return - 2.95
Throat depth:   12.20"
Motor HP:   15
Tank capacity - gallons:   44.90

Dimensions, with all sheet metal covers mounted,

Approximately L x W x H - 133.85 x 52.36 x 92.5"
Weight - lbs. - Approximately 15,100


MACHINE FEATURES/STANDARD EQUIPMENT:
* Downstroking moving beam (ram)
* Fully hydraulic design and operation, utilizing two

hydraulic cylinders
* Cylinder pistons ground, hard-chrome plated and ground a

second time for precision and maximum life
* High volume pump
* Adjustable working pressure and pressure regulating gauge
* All-steel, monoblock construction
* Torsion bar for ram parallelism
* Infinitely adjustable mechanical depth stops, pushbutton

operated with electronic digital readout
* Two-speed ram advance (hi/low)
* Controls in a swiveling console on the machine, a movable

pedestal with two-hand control, foot control, and emergency

stop control
* Two front support arms adjustable left-to-right on the

dovetail
* Sheet metal safety guards at back and sides of the machine
* Electrics for 3/60/220 or 3/60/440 with controls as

indicated above. Low voltage at the controls.
* Flush floor mount
* Safety limit switches for minimum and maximum settings of

travel in power ram adjustment and power front operated

backgauge


THE TOOLING INCLUDED FEATURES:
Upper beam set up to hold American style forming punches

with standards 
safety tongue (drawing on request)
Front-to-back wedge arrangement in bed for die compensation

THE BACKGAUGE INCLUDED FEATURES:
Go-to power backgauge with aluminum rail bar for easy,

smooth operation
Manual R axis (height of back stops)
Manual Z axis (side-to-side adjustment of backgauge stops)

THE CONTROL:
Elgo go-to-control for X axis position (backgauge front to

back for flange dimension)
Elgo go-to control for Y axis position (ram depth for bend

angle position)


PLEASE NOTE:
Special packages available with tooling and 200 step

programmable control.

PLEASE NOTE:
The machine quoted here includes electrical components that

will handle a voltage variance of +/- 5% from 220/440 volt.
If your true incoming voltage under load exceeds this range,

please advise upon ordering and the proper components will

be sent (may require extra charge, depending on actual

voltage);
or, you will be subject to an additional handling charge if

new components must be shipped at a later date.