5' x 17", JET RADIAL ARM DRILL, STK#320038, MODEL#J-1600R **NEW**

Specific Info On This Equipment

Reference Number: 7942

Condition: New

"If you need a machine and don't buy it, then you will ultimately find you have paid for it but don't have it."   Henry Ford

Full Product Description

Model:  J-1600R
Stock Number:  320038  
Motor:  7-1/2 HP, 230/460V, 3 Ph, Prewired 230V See 320039
for 460V unit
Number of Spindle speeds:  12 (40 - 1920)  
Spindle Taper:  MT-5  
Max Distance Spindle to Table ( in.):  47-3/8  
T-Slots Number and Size (in.):  3 & 7/8  
Column Diameter (in.):  17  
Drilling Capacity Cast Iron (in.):  2-5/16  
Drilling Capacity Mild Steel (in.):  2-1/2  
Tapping Capacity Cast Iron (in.):  2-3/8  
Tapping Capacity Mild Steel (in.):  2  
Boring Capacity Steel (in.):  5  
Boring Capacity Cast Iron (in.):  7-3/8  
Distance Column to Spindle (max/in.):  62-1/4  
Distance Column to Spindle (min/in.):  13-3/8  
Travel of Head Horizontal (in.):  49-5/8  
Distance Base to Spindle (max/in.):  63  
Distance Base to Spindle (min/in.):  15  
Arm Travel Vertical (in.):  33-15/32  
Quill Travel (in.):  14-9/16  
Quill Travel w/ Powerfeed engaged (in.):  13  
Quill Down feed Rates (IPR):  6 (.003 - .038 IPR)  
Elevating Motor:  2 HP  
Base Dimensions (in.):  97-5/8 X 41-11/32 X 8-1/4  
Coolant Pump Motor:  1/8 HP  
Table Dimensions (in.):  27-7/8 X 19-5/8 X 15-3/4  
Clamping Motor:  1 HP  
Overall Dimensions:  116 x 55 x 112  
Height:  115 inch
Width:  110 inch
Length:  57 inch
Net Weight:  11000 pound

* The power train gears and spline shaft are made of the
finest quality, heat treated and ground nickel-chrome steel,
giving extra strength and smoothness to high torque loads
* The spindle is made of the finest case hardened steel
for extra strength and wear
* The spindle is supported by double row taper roller and
thrust ball bearings at the nose, with thrust and radial
axis bearings at the top
* The spindle is built to withstand exceptionally heavy
drilling and boring loads and to insure maximum accuracy
* Push button controls are all reduced to 110V
* Electrical circuits are located in the built-in control
box at the rear of the arm- this keeps the contols dust and
humidity free while making them easily accessible for
* Entire frame is made of Meehanite and high tensile
strength cast iron to handle the heaviest of jobs
* Arm raising safety device prevents arm from dropping
* Counter balanced mechanism for spindle return
* 12 speeds/3 feed rates make exotic materials easier to
drill, bore and tap
* Centralized control center
* Automatic tool ejector
* Hydraulic head and column clamping

* Built in work light
* Coolant pump
* Tool kit
* Box table