120 Ton, ATLANTIC, No. HDE 120-8-6 CONVENTIONAL HYDRAULIC **NEW**



Condition: New


"If you need a machine and don't buy it, then you will ultimately find you have paid for it but don't have it."   Henry Ford

Full Product Description

MODEL:   HDE 120-8-6
TONNAGE:   120 TONS
CAPACITY:   120 TONS
OVERALL BENDING LENGTH:   102"
CLEAR DISTANCE BETWEEN HOUSINGS:   82"
STROKE (ADJUSTABLE):   4.7"
THROAT:   9.8"
OPEN HEIGHT:   12.8"
ELECTRIC MOTOR:   10 HP
VOLTAGE:   220/440VAC
RAPID APPROACH SPEED:   165"/MIN
MAXIMUM PRESS SPEED:   18"/MIN
RAPID RETURN SPEED:   165"/MIN
LENGTH:   109"
OVERALL HEIGHT:   88"
FRONT/BACK:   61"
WEIGHT:   14,300 LBS


The Atlantic HDE Press Brake quoted belongs to a new

generation of steel fabricating equipment with several

standard features which will provide your company with safe,

accurate, dependable and high productive use which can put

your company one step ahead of your competition.

HACO-ATLANTIC, Inc., member of the HACO International Group,

builds SAFE machines conforming to ANSI B11.3 "American

National Standard for machine tools -power press brakes-

safety requirements for construction, care and use."  We

deliver our machine with a safety handbook, as well as

interfacing capabilities for owner installed safety devices. 

Due to the multiple purposes of a press brake, point of

operation guards should be installed by the purchaser in

accordance with Federal Safety Requirements.

PRODUCTIVITY will be increased by installing a Atlantic

Press Brake due to its versatility and easy operation of the

machine.  The press brake comes standard with multi-speed

operation, simple yet accurate high speed hydraulics with

easy set ups, and conveniently

Your company will gain customer confidence resulting from

the ACCURACY the Atlantic Press Brake gives you.  Our

internal mechanical stop system guarantees bending accuracy

only limited to material differences or tooling inaccuracy. 

In addition to the mechanical stops, our deep sectioned bed

and ram insure minimal deflection, further adding to the

machines accuracy. 

Most importantly, your machine will be DEPENDABLE.  The

machine is built with top quality components.

We are confident that a decision to purchase an HDE Series

Press Brake will be one of your company's wisest business

decisions.

CONSTRUCTION
Rugged all steel interlocked and welded construction for

maximum strength and minimum deflection.  All frames are

stress relieved after welding to provide as near perfect

surfaces as possible, which in turn results in better bends. 

The all-welded construction also resists torque twist that

is sometimes found in bolt-together designs.

Flush floor mount.  No pit or special foundation required.  

Precision bed and ram.  All HDE press brakes use single,

deep-sectioned plates for the bed and ram.  The ram is

fitted with more punch clamping plates and bolts than is

commonly found on other machines.  This enables the operator

to easily and securely clamp small tooling segments if he is

not using one long punch.  The bed is an integral part of

the machine frame and is machined in one set up in

conjunction with the ram ways and cylinder mounts.  This

insures positive alignment relationships between the ram,

bed and frame for guaranteed accuracy.

The bed has a removable table that can be re-machined in the

event of accidental overload damage or eventual wear from

the tooling.  Crowning to suit your application is done by

our service engineer upon installation of the machine.  The

amount of crown can easily be changed if necessary. Manual

or CNC controlled crowning tables are offered as an option.

Full length die slot in removable table with set screws.

Large throat gaps in side frames and unusually clear working

space.

Machine comes standard with American style tool holders. 

System (Amadar) style tool holders with built-in wedge

system can be installed as an option as well as hydraulic

upper tool clamping for either style.

A torsion bar assures the equality of the beam during the

entire down stroke of the ram, even if off center or uneven

loading occurs.  The torsion bar is made of solid stock,

which is connected to both sides of the ram.  This system

has been proven to be the most efficient one.

The depth of the machine is controlled by two mechanical

adjustable stops, built inside the hydraulic cylinders. 

This guarantees a dirt-free and accurate repetition of the

depth control.

The ram is guided by precision ground ways and removable non-

metallic gibs.

The hydraulics are equipped with a safety relief system to

prevent overloads.  The hydraulic system is placed on top of

the machine free from debris and dirt and easy to service. 

The machine comes complete with hydraulic fluid.

Most hydraulic and electric components are standard

industrial/commercial grade, off-the shelf items from major

manufacturers such as Parkerr, Vickersr or Rexrothr

hydraulics and Telemecaniquer or ABBr electrics.

Wandering foot pedal with hand grab, dual foot pedals for

ram control.  Second foot pedal and two-hand control are

offered as an option.

CONTROL 
The HDE Press Brake comes standard with a movable pendant

control panel, mounted on the left side of the machine. The

control panel includes:
- key switch 
- machine on-off and safe run indicator light - manual

down/manual return or manual down/automatic return switch -

power depth stop adjustment push buttons - Ram depth

position is displayed on a digital counter read out on front

of the machine
- Tonnage limiting control is standard so the operator can

run the machine at the required tonnage rather than at full

load to extend the lifetime of the machine and to prevent

from damaging the tooling.
- Tonnage indicator is standard to monitor bending load
- Three speed operation: fast approach, slow bending, fast

return.  Top stop and speed change  locations are variable

by adjustable cams on the left hand side of the machine.
-Wandering foot pedal control, two pedal system

GENERAL
- Machine can be wired for 220 or 440V, 3 phase, 60Hz
- A full tank of hydraulic oil and service tools included.
- One safety, operator and service manual included.
- All ATLANTIC HDE Press Brakes are built to conform to ANSI

B11.3 "American Standard for machine tool- power press

brakes- safety requirements for construction, care and use". 

The purchaser shall be responsible for the proper

installation and continued use of point of operation guards

and/or awareness barriers to assure required operator

safety.
- One year warranty on spare parts and labor, except tooling

from the date of installation.  Warranty shall be considered

void if the machine is not used in a normal and proper

manner, not properly maintained, or modified for any special

use.  No other warranty is either expressed or implied by

HACO-ATLANTIC, Inc. Or any of its representatives.  For the

sake of its expediency involving a minor failure, HACO-

ATLANTIC, Inc. May at its option allow the user to purchase

a needed part locally for which he will be reimbursed upon

return of the defective part.
- Installation, start up and training is included. 

OPTIONAL EQUIPMENT
Filler block 8'L x 3-"H x 3"W    $1,446.00
31" manual front operated back gauge    *$2,770.00
31" motorised front operated back gauge    *$4,200.00
More price for 39" back gauge extension in lieu of standard

*$495.00
More price for extra finger block for back gauge

$345.00/each
29" front support arm with 2 T-slots and 1 tilting stop

$375.00/each
Additional tilting stop for front support arm   $65.00/each
Additional tilting stop with micrometer adjustment for front

support arm    $ 210.00/each
Extra microswitch for punching    $370.00
T-slot in bed, price per side    *$660.00
Second foot pedal in series with standard pedal   $1,130.00
Extra emergency stop button in specified location   $295.00
Electrical stroke counter    $450.00
Two hand control    *$3,500.00
18" Triad Superlight V, Mdl#TR18-4F-15 Infrared light

curtain system    $ 2,650.00
Spaced light beam
One beam floating blank capacity
Triad swing mount brackets, model 9000, price per pair

$895.00
Atlantic fixed mount brackets, price per pair    $750.00
Extra operator's manual    $70.00
* indicates factory installation only


GENERAL CONDITIONS
Payment Terms: 20% with order, 80% upon installation.
FOB: HACO-ATLANTIC warehouse, Houston, TX.
Delivery Terms:  approx 16-20 weeks after order.
Validity of Offer: 90 days from August 21, 2002.