120 Ton, ATLANTIC, No. HDE 120-10-8 CONVENTIONAL HYDRAULIC **NEW**
Reference Number: 1715
"If you need a machine and don't buy it, then you will ultimately find you have paid for it but don't have it." Henry Ford
Full Product Description
MODEL: HDE 120-10-8 TONNAGE: 120 TONS CAPACITY: 120 TONS OVERALL BENDING LENGTH: 122" CLEAR DISTANCE BETWEEN HOUSINGS: 102" STROKE (ADJUSTABLE): 4.7" THROAT: 9.8" OPEN HEIGHT: 12.8" ELECTRIC MOTOR: 10 HP VOLTAGE: 220/440VAC RAPID APPROACH SPEED: 165"/MIN MAXIMUM PRESS SPEED: 18"/MIN RAPID RETURN SPEED: 165"/MIN LENGTH: 128" OVERALL HEIGHT: 88" FRONT/BACK: 61" WEIGHT: 15,400 LBS The Atlantic HDE Press Brake quoted belongs to a new generation of steel fabricating equipment with several standard features which will provide your company with safe, accurate, dependable and high productive use which can put your company one step ahead of your competition. HACO-ATLANTIC, Inc., member of the HACO International Group, builds SAFE machines conforming to ANSI B11.3 "American National Standard for machine tools -power press brakes- safety requirements for construction, care and use." We deliver our machine with a safety handbook, as well as interfacing capabilities for owner installed safety devices. Due to the multiple purposes of a press brake, point of operation guards should be installed by the purchaser in accordance with Federal Safety Requirements. PRODUCTIVITY will be increased by installing a Atlantic Press Brake due to its versatility and easy operation of the machine. The press brake comes standard with multi-speed operation, simple yet accurate high speed hydraulics with easy set ups, and conveniently Your company will gain customer confidence resulting from the ACCURACY the Atlantic Press Brake gives you. Our internal mechanical stop system guarantees bending accuracy only limited to material differences or tooling inaccuracy. In addition to the mechanical stops, our deep sectioned bed and ram insure minimal deflection, further adding to the machines accuracy. Most importantly, your machine will be DEPENDABLE. The machine is built with top quality components. We are confident that a decision to purchase an HDE Series Press Brake will be one of your company's wisest business decisions. CONSTRUCTION Rugged all steel interlocked and welded construction for maximum strength and minimum deflection. All frames are stress relieved after welding to provide as near perfect surfaces as possible, which in turn results in better bends. The all-welded construction also resists torque twist that is sometimes found in bolt-together designs. Flush floor mount. No pit or special foundation required. Precision bed and ram. All HDE press brakes use single, deep- sectioned plates for the bed and ram. The ram is fitted with more punch clamping plates and bolts than is commonly found on other machines. This enables the operator to easily and securely clamp small tooling segments if he is not using one long punch. The bed is an integral part of the machine frame and is machined in one set up in conjunction with the ram ways and cylinder mounts. This insures positive alignment relationships between the ram, bed and frame for guaranteed accuracy. The bed has a removable table that can be re-machined in the event of accidental overload damage or eventual wear from the tooling. Crowning to suit your application is done by our service engineer upon installation of the machine. The amount of crown can easily be changed if necessary. Manual or CNC controlled crowning tables are offered as an option. Full length die slot in removable table with set screws. Large throat gaps in side frames and unusually clear working space. Machine comes standard with American style tool holders. System (Amadar) style tool holders with built-in wedge system can be installed as an option as well as hydraulic upper tool clamping for either style. A torsion bar assures the equality of the beam during the entire down stroke of the ram, even if off center or uneven loading occurs. The torsion bar is made of solid stock, which is connected to both sides of the ram. This system has been proven to be the most efficient one. The depth of the machine is controlled by two mechanical adjustable stops, built inside the hydraulic cylinders. This guarantees a dirt-free and accurate repetition of the depth control. The ram is guided by precision ground ways and removable non- metallic gibs. The hydraulics are equipped with a safety relief system to prevent overloads. The hydraulic system is placed on top of the machine free from debris and dirt and easy to service. The machine comes complete with hydraulic fluid. Most hydraulic and electric components are standard industrial/commercial grade, off-the shelf items from major manufacturers such as Parkerr, Vickersr or Rexrothr hydraulics and Telemecaniquer or ABBr electrics. Wandering foot pedal with hand grab, dual foot pedals for ram control. Second foot pedal and two-hand control are offered as an option. CONTROL The HDE Press Brake comes standard with a movable pendant control panel, mounted on the left side of the machine. The control panel includes: - key switch - machine on-off and safe run indicator light - manual down/manual return or manual down/automatic return switch - power depth stop adjustment push buttons - Ram depth position is displayed on a digital counter read out on front of the machine - Tonnage limiting control is standard so the operator can run the machine at the required tonnage rather than at full load to extend the lifetime of the machine and to prevent from damaging the tooling. - Tonnage indicator is standard to monitor bending load - Three speed operation: fast approach, slow bending, fast return. Top stop and speed change locations are variable by adjustable cams on the left hand side of the machine. -Wandering foot pedal control, two pedal system GENERAL - Machine can be wired for 220 or 440V, 3 phase, 60Hz - A full tank of hydraulic oil and service tools included. - One safety, operator and service manual included. - All ATLANTIC HDE Press Brakes are built to conform to ANSI B11.3 "American Standard for machine tool- power press brakes- safety requirements for construction, care and use". The purchaser shall be responsible for the proper installation and continued use of point of operation guards and/or awareness barriers to assure required operator safety. - One year warranty on spare parts and labor, except tooling from the date of installation. Warranty shall be considered void if the machine is not used in a normal and proper manner, not properly maintained, or modified for any special use. No other warranty is either expressed or implied by HACO-ATLANTIC, Inc. Or any of its representatives. For the sake of its expediency involving a minor failure, HACO- ATLANTIC, Inc. May at its option allow the user to purchase a needed part locally for which he will be reimbursed upon return of the defective part. - Installation, start up and training is included.