17" x 40" cc, KENT, PRECISION ENGINE LATHE, MODEL#ML-1740T **NEW**
Specific Info On This Equipment
Reference Number: 2314
Condition: New
"If you need a machine and don't buy it, then you will ultimately find you have paid for it but don't have it." Henry Ford
Full Product Description
Model: ML-1740T Swing over bed ways: 17" (435mm) Swing over cross slide: 10.875" (277mm) Swing over gap: 24.5" (622mm) Gap length (w/ face plate): 8" (200mm) Bed width: 12" (305mm) Distance between centers: 44" (1120mm) Spindle hole: 3.125" (80mm) Spindle nose camlock: D1-6 Spindle to sleeve taper: MT#7 - MT#4 Spindle speed: 12 Steps, 36 - 1800 RPM Spindle speed ranges: N/A Bearing length on ways: 17.3" (440mm) Cross slide width: 18.75" (477mm) Cross slide travel: 10.6" (270mm) Top slide (compound) travel: 4.75" (120mm) Thread capacity (inches): 45, 2 - 72 TPI Thread capacity (metric): 39, 0.2 - 14 MM Modular threads range: 18, 0.3 - 3.5 M Diametral pitch range: 21, 8 - 44 DP Longitudinal feeds: 0.0015 - 0.04 IPR Cross feeds: 0.00075 - 0.02 IPR Quill diameter with tang: 2.3" (59mm) Quill travel: 5" (130mm) Quill taper: MT#4 Main motor: 7.5 HP Coolant pump motor: 1/8 HP Control circuit voltage: 115 V Shipping dimension: 88"x39"x63" Net weight (approx): 3850 LBS Gross weight (approx): 4510 lbs EQUIPPED WITH: 3-jaw Chuck (10"), Steady rest, Follow rest, Chuck cover, Halogen work light, Thread chasing dial, 4-position tool post, Coolant system with full-length splashguard, 3 Position carriage stop and a bed mount carriage stop FEATURES: * 7.5 HP Spindle Motor, 12-Speeds * 3.125" Spindle Through Hole * Solid Full Length Casting Base * Front Loading Chip Tray for Easier Cleaning * Adjustable Over-load Feed Clutches * Quick Reversal Feed from Apron * Full-length Safety Foot Brake * Spindle Jog Button Control * One-shot Lubrication for Apron * Carriage, and Bed Ways * Multi-position Adjustable Feed Position Stops * Dual Inch/Metric Calibrated Tailstock * Quill with Knockout Tang * Heavy Duty Two Speed Tailstock * Dual Inch/Metric Dials with Quick-change sleeve OPTIONAL ACCESSORIES: Acu-Rite 200S DRO* (2-axis, x=0.0001"/z=0.0002" res): $2,240.00 DRO Installation: $250.00 ALORIS CA #4 Quickchange Set (tool post plus 6 holders): $1,285.00 5C lever style collet closer: $ 1,145.00 Royal spindle type live center: $500.00 BTC 3-jaw chuck w/back plate (Zero-set, 8" D1-6): $800.00 BTC 3-jaw chuck w/back plate (Zero-set, 10" D1-6): $ 1,155.00 4-jaw independent Chuck (10" D1-6): $650.00 Face plate (12" D1-6): $650.00 Taper turning attachment: *$ 1,500.00 Micrometer carriage stop: $350.00 Prolong Ultra-Cut coolant (2.5 gallon, mixes 1:30): $150.00 * Installed options may required deposit; which is non- cancelable and non-refundable. POWER REQUIREMENTS: 230 volts, 3-phase, 60 Hz, 20 Amp (Standard) 460 volts, 3- phase, 60 Hz, 10 Amp (Avail on order)