16" x 40" cc, KENT, MODEL#RML-1640T **NEW**

Specific Info On This Equipment

Reference Number: 2593

Condition: New

"If you need a machine and don't buy it, then you will ultimately find you have paid for it but don't have it."   Henry Ford

Full Product Description

Model:  RML-1640T
Swing over bed:  16-3/16" (410 mm)
Swing over cross slide:  10-3/8" (264 mm)
Swing over gap:  23" (584 mm)
Width of bed:  10-1/4" (260 mm)
Distance between centers:  40" (1000 mm)
Cross slide travel:  8-11/16" (220 mm)
Top slide travel:  5-1/2" (140 mm)
Spindle speeds:  12 steps
Spindle speed range:  36-1800 RPM
Through hole diameter:  2-1/16" (52.5 mm)
Spindle nose:  D1-6 camlock
Spindle bore taper:  MT #6
Standard (Whit-worth):  45 (2-72) TPI
Metric pitch:  39 (0.2-14) MM
Module (mm):  18 (0.3-3.5)
Diametrical:  21 (8-44) DP
Longitudinal feeds:  0.002"-0.067" IN/REV
Cross feeds:  0.001"-0.034" IN/REV
Leadscrew diameter:  4/5" (20 mm)
Thread pitch:  4 TPI
Quill travel:  6" (155 mm)
Quill diameter:  2" (52 mm)
Quill bore taper:  MT #4
Main motor:  5 HP (3-phase, 220/440V)
Coolant pump motor:  1/8 HP (3-phase)
Overall dimension:  81" x 38" x 62" (LxWxH)
Packing dimension:  87" x 42" x 66" (LxWxH)
Net weight:  3520 lbs
Gross weight:  3960 lbs

3-jaw chuck (9"), Chuck cover, Steady rest, Follow rest, 4-
position tool post, Coolant system, Full-length splashguard,
Halogen work light, Carriage stop, Thread chasing dial,
Toolbox with standard tools

* 5 HP main spindle motor
* 36-1800, 12 steps spindle speeds
* Hardened and ground gears and bedways
* Cast iron machine bedways w/full onepiece cast base and
front pull-out chip tray for easier cleaning
* Foot brake and T-Slot compound Inch/metric reading on
* Inch/metric ruler on tailstock quill
* ISO 9001 certified manufacturer

Acu-Rite 200T DRO (2-axis, x=0.0001"/z=0.0002"res) Aloris
CXA #3-Set (tool post plus 6 holders) Micro Carriage Stop
Royal 5C lever style collet closer Royal spindle type live
BTC 3-jaw chuck (Zero-set, 8" D1-6) BTC 3-jaw chuck (Zero-
set, 10" D1-6) 
4-jaw independent chuck (10" D1-6) Taper turning attachment 
Face plate (12" D1-6)  
Prolong Ultra-cut coolant (2.5 gal, mixes 1:30) 

POWER REQUIREMENTS: 220/440 volts, 60 Hz, 3-phase, 17/8.5