10 Ton, DAKE H-FRAME, MANUAL-OP, SINGLE ACTING PRESS **NEW**
Specific Info On This Equipment
Reference Number: 4985
"If you need a machine and don't buy it, then you will ultimately find you have paid for it but don't have it." Henry Ford
Full Product Description
Model: F-10 Capacity: 10-tons Cylinder Travel: Movement left and right of center Ram Diameter: 1-1/2 inches Ram Travel: 6 inches Hydraulic Pump: Manual operated Oil System: Sealed system Weight: 225 pounds Overall Height: 60 inches Base Width: 26 inches Depth: 24 inches Width Between Uprights: 16-3/4 inches Width Between Table Channels: 3 inches Maximum Ram to Table: 38 inches Minimum Ram to Table: 0-4 inches FEATURES: * Fast, quite, dependable, utility press with an economical price, that is smooth operating and very simple to operate. Prefect for shops with limited room. For pressing bearings, bushings, staking, broaching, clamping, straightening, bending and other applications. * Ram moves from side to side in head frame for off center work, moving the ram allows the work piece to remain stationary. * Pump hanger built onto the frame for storage of pumping unit when not in use. Helps keep it out of the way and to prevent damage to unit. Remove pump from hanger and position it on bench top for most comfortable operation. * Gauge for pressure readings. * Design of cylinder and pumping unit allows press to hold pressure with minimum pressure bleed off. * Adjustable table can be set to a comfortable work height. Table pins keep table securely in place during the pressing operations. * Pressure preset and locked out at factory for maximum pressing, Low operating pressures. * Assembles in just minutes and can be mounted on a bench to free up floor space. * Complete with two multi-purpose table plates, nose piece and stepped nosepiece for bearing applications. * Ergonomically designed for ease of operation and less operator fatigue. * Complete English owners manual.