KENT, MANUAL VARI-SPEED 9X49 MILL, MODEL#KTM-3VS **NEW**

Full Product Description

Model:  KTM-3VS
Table size:  9" x 49"
Table travel (X-axis):  35"
Saddle travel (Y-axis):  12"
Knee travel (Z-axis):  15"
Quill travel:  5"
Ram travel:  14.5"
Spindle motor:  3 HP (1750 rpm @ 60 Hz)
Spindle speed:  60-500-4200 (2 range, Hi/Low)
Spindle taper:  R-8 (NMTB-30 optional)
Quill diameter:  3.375"
Quill feed rate:  0.0015/0.003/0.006" per rev
Drilling capacity (manual):  0.75" diameter
Drilling capacity (power):  0.37" diameter
Boring capacity:  6.0" diameter
Milling capacity:  2.0 in3/min
Maximum work load (center):  750 lbs
Machine Net weight:  2400 lbs 
Shipping Weight:  2500 lbs 
Shipping Dimensions:  72" x 72" (skid)
Power requirement:  220/440 volts, 3 Ph, 60 Hz, 10/5 Amp


FEATURES:
* 3HP spindle motor, variable speed head 
* 9" x 49" hardened & ground table * Table, saddle, and knee
with hardened and ground dovetail ways
* Precision ground leadscrews with backlash compensating
double nut
* Precision bored & ground milling head, with super
precision ABEC-7 bearings
* Meehaniter casting, with built in coolant reservoir in
machine base
* Centralized one-shot lubrication, with metered check-
valves

OPTIONAL ACCESSORIES:
Optional 9" x 42" table 
Acu-Rite 200S DRO System (2-axis, 0.0002" res. 9"x42" opt
Acu-Rite 200S DRO System (2-axis, 0.0002" res. 9"x49") 
DRO installation charge 
Table (x-axis) power feed 
Saddle (y-axis) power feed 
Knee (z-axis) power feed 
Air power drawbar (Maxi-Torque, made in USA) 
Flood coolant system (built-in base) 
Chip tray 
Right angle milling attachment with arbor support 
Rustlick coolant (1 gallon, mixes 1:30) 
Riser block (4") 
Riser block (6") 
Riser block (8") 
Angle-lock vise (6") 
Angle-lock vise (8") 00
Rotary table (12", vertical and horizontal) 
Clamping kit (52 pc) 
R-8 collet set (11 pc/set, 1/8" to 3/4") 
Upgrade to 440V power on 3VSF AC-Freq drive model 
NMTB-30 spindle