150 Ton, ATLANTIC 150-12-10 CONVENTIONAL HYDRAULIC PRESSBRAKE **NEW**



Condition: New


"If you need a machine and don't buy it, then you will ultimately find you have paid for it but don't have it."   Henry Ford

Full Product Description

MODEL:   150-12-10

TONNAGE:   150 TONS
CAPACITY:   150 TONS
OVERALL BENDING LENGTH:   144"
CLEAR DISTANCE BETWEEN HOUSINGS:   124"
STROKE (ADJUSTABLE):   4.7"
THROAT:   9.8"
OPEN HEIGHT:   12.8"
H.P. ELECTRIC MOTOR:   15 HP
VOLTAGE:   220/440 VAC 3 PHASE 60HZ
RAPID APPROACH SPEED:   165"/MIN
PRESS SPEED:   18"/MIN
RAPID RETURN SPEED:   150"/MIN
LENGTH:   150"
OVERALL HEIGHT:   89"
FRONT/BACK:   61"
WEIGHT:   19,400 LBS



CONSTRUCTION:

* RUGGED ALL STEEL INTERLOCKED AND WELDED CONSTRUCTION FOR

MAXIMUM STRENGHT AND MINIMUM DEFLECTION.  ALL FRAMES ARE

STRESS RELIEVED AFTER WELDING TO PROVIDE AS NEAR PERFECT

SURFACES AS POSSIBLE WHICH IN TURN RESULT IN BETTER BENDS. 
* ALL WELDED CONSTRUCTION ALSO RESISTS TORQUE TWIST THAT IS

SOMETIMES FOUND IN BOLT TOGETHER DESIGNS.
* FLUSH FLOOR MOUNT.  NO PIT OR SPECIAL FOUNDATION REQUIRED.
* PRECISION BED AND RAM.  ATLANTIC HDE PRESS BRAKES UTILIZE

SINGLE, DEEP SECTIONED PLATES FOR THE BED AND RAM. THE RAM

IS FITTED WITH MORE PUNCH CLAMPING PLATES AND BOLTS THAN IS

COMMONLY FOUND ON OTHER MACHINES.  THIS ENABLES THE OPERATOR

TO EASILY AND SECURELY CLAMP SMALL TOOLING SEGMENTS IF HE IS

NOT USING ONE LONG PUNCH.  THE BED IS AN INTEGRAL PART OF

THE MACHINE FRAME AND IS MACHINED IN ONE SET UP IN

CONJUNCTION WITH THE RAM WAYS & CYLINDER MOUNTS.  THIS

INSURES POSITIVE ALIGNMENT RELATIONSHIPS BETWEEN THE RAM,

BED AND FRAME FOR GUARANTEED ACCURACY.
* THE BED HAS A REMOVABLE TABLE THAT CAN BE RE-MACHINED IN

THE EVENT OF ACCIDENTAL OVERLOAD DAMAGE OR EVENTUAL WEAR

FROM THE TOOLING.  CROWNING TO SUIT YOUR APPLICATION IS DONE

BY OUR SERVICEMAN ON INSTALLATION.  THE AMOUNT OF CROWN CAN

EASILY BE CHANGED IN THE FUTURE IF YOUR TYPICAL APPLICATION

CHANGES.
* FULL LENGTH DIE SLOT IN REMOVABLE TABLE WITH SET SCREWS.
* MANUAL CONTROLLED CENTRAL ADJUSTABLE ANTI-DEFLECTION

TABLES ARE AVAILABLE AS AN OPTION.
* STANDARD ARE LARGE THROAT GAPS IN SIDE FRAMES AND

UNUSUALLY CLEAR WORKING SPACE.
* MACHINES COME STANDARD WITH AMERICAN STYLE TOOL HOLDERS. 

SYSTEMS STYLE TOOL HOLDERS WITH BUILT-IN WEDGE SYSTEM CAN BE

INSTALLED AS AN OPTION AS WELL AS HYDRAULIC UPPER TOOL

CLAMPING FOR EITHER STYLE.
* PARALLELISM IS MAINTAINED THROUGH A TORSION BAR SYSTEM

UNTIL THE CYLINDER STOPS ARE ENGAGED.  THE TORSION BAR IS

MADE FROM SOLID STOCK AND IS CONNECTED TO THE ENDS OF THE

RAM. THE TORSION BAR MAINTAINS PARALLELISM THROUGHOUT THE

ENTIRE STROKE EVEN IF OFF CENTER LOADING OR UNEVEN LOADING

OCCURS. THIS SYSTEM IS LESS COMPLICATED AND THEREFORE LESS

TROUBLESOME THAN A HYDRAULIC PROPORTIONING SYSTEM.
* POWER OPERATED INFINITELY ADJUSTABLE MECHANICAL STOPS

INSIDE THE CYLINDERS TO PROVIDE DIRT FREE AND ACCURATE

REPETITION OF DEPTH OF STROKE.
* RAM GUIDED ON PRECISION GROUND WAYS AND REMOVABLE NON-

METALLIC GIBS.
* HYDRAULICS ARE EQUIPPED WITH A SAFETY RELIEF SYSTEM TO

PREVENT OVERLOADS AND THE COMPLETE SYSTEM IS PLACED NEAR THE

TOP REAR OF THE MACHINE FREE FROM DEBRIS AND DIRT AND OUT OF

THE WAY TO ALLOW EASE OF MATERIAL HANDLING.
* MOST HYDRAULICS AND ELECTRIC COMPONENTS ARE STANDARD

INDUSTRIAL/COMMERCIAL GRADE, OFF-THE-SHELF, ITEMS FROM MAJOR

MANUFACTURERS SUCH AS PARKERr, VICKERS, OR REXROTH

HYDRAULICS AND TELEMECANIQUE ELECTRICS.
* CYLINDERS ARE MANUFACTURED BY HACO-ATLANTIC, INC. AND

FEATURE PARKER POLYPAC SEALS AND PARKER WIPER SEALS.


CONTROLS:

* RAM DEPTH STOP POSITION IS DISPLAYED ON DIGITAL COUNTER

READ-OUT ON FRONT OF MACHINE.
* TONNAGE LIMITING CONTROL IS STANDARD SO THAT THE OPERATOR

CAN RUN THE MACHINE AT THE REQUIRED TONNAGE RATHER THAN AT

FULL LOAD TO EXTEND THE LIFE OF THE MACHINE AND PREVENT

DAMAGE TO TOOLING.
* TONNAGE INDICATOR IS STANDARD TO MONITOR BENDING LOAD.
* THREE SPEED OPERATION: FAST APPROACH, SLOW BENDING, FAST

RETURN.
* TOP STOP AND SPEED CHANGE LOCATIONS ARE INFINITELY

VARIABLE BY ADJUSTABLE CAMS ON THE LEFT HAND SIDE OF THE

MACHINE.
* PORTABLE FOOT CONTROL WITH HAND GRIP, TWO PEDAL SYSTEM.
* CONTROLS ARE MOUNTED ON A MOVABLE PENDANT ASSEMBLY MOUNTED

OFF THE LEFT HAND SIDE OF THE MACHINE.
CONTROLS INCLUDE:
   - KEY SWITCH - MACHINE ON-OFF AND SAFE RUN INDICATOR

LIGHT.
   - MOTOR ON-OFF PUSH BUTTONS.
   - MANUAL DOWN/MANUAL RETURN OR MANUAL DOWN/AUTOMATIC

RETURN SELECTOR SWITCH.
   - POWER DEPTH STOP ADJUSTMENT PUSH BUTTONS.


OPTIONAL EQUIPMENT

* FILLER BLOCK 12'L X 3"H X 3"W$2030.00

*** MOTORIZED FRONT OPERATED BACK GAUGE
WITH (2) TWO FINGER BLOCKS 31" RANGE$5470.00
*** FOR 39" RANGE OF ABOVE BACK GAUGE  -  ADD

ADDITIONAL$540.00

* (1) ONE EXTRA FINGER BLOCK FOR ABOVE BACK GAUGE$390.00

* (1) ONE 29" FRONT SUPPORT ARM
   WITH (2) TWO T-SLOTS AND (1) ONE TILTING STOP$410.00

* (1) ONE EXTRA TILTING STOP FOR ABOVE FRONT SUPPORT

ARM$80.00

* (1) ONE PROXIMITY SWITCH AND (1) ONE CAM FOR

PUNCHING$390.00

*** T-SLOT, PER SIDE$1160.00

* (1) ONE EXTRA EMERGENCY STOP BUTTON IN SPECIFIED

LOCATION$340.00

* SECOND FOOT PEDAL IN SERIES WITH FIRST STANDARD FOOT

PEDAL$1220.00

* ELECTRICAL STROKE COUNTER$350.00

* (1) ONE EXTRA OPERATORS AND SERVICE MANUAL.$70.00

*** TWO-HAND CONTROL$3800.00

* 18" TRIAD SUPERLIGHT Vr MODEL TR18-4F-15 INFRARED LIGHT

CURTAIN WITH SPACED LIGHT BEAM & ONE BEAM FLOATING BLANK

CAPACITY$2950.00

* PAIR OF TRIAD MODEL 9000 SWING MOUNT BRACKETS$995.00

* HYDRAULIC CLAMPING FOR AMERICAN STYLE UPPER

TOOLING$9930.00

* MANUAL ADJUSTABLE CROWNING TABLE 
- MOUNTED ON TOP OF BED INSTEAD OF STANDARD TABLE,
NO LOSS OF DAYLIGHT OPENING MAX DEFLECTION +/-

0.080"$7990.00

This list shows only the most common optional equipment, for

information on additional options, please contact us. 

Prices of optional equipment are valid only if ordered with

machine purchase for factory installation. Prices for field

installation available on request.

(***) Indicate items for factory installation only, field

installation not available.