100 Ton, PRIMELINE 10' DOWNSTROKING HYDRAULIC CNC PRESS BRAKE **NEW**
"If you need a machine and don't buy it, then you will ultimately find you have paid for it but don't have it." Henry Ford
Full Product Description
MODEL: 10' X 100-TON Specifications: Capacity - tons: 100 Bending length - overall: 122.04" Distance between housings: 100.39" Stroke - adjustable: 7.48" (Including screw adjustment) Speeds of ram - inches per second: Approach - 3.94 Bend - .35 Return - 2.95 Throat depth: 12.20" Motor HP: 15 Tank capacity - gallons: 44.90 Dimensions, with all sheet metal covers mounted, Approximately L x W x H - 133.85 x 52.36 x 92.5" Weight - lbs. - Approximately 15,100 MACHINE FEATURES/STANDARD EQUIPMENT: * Downstroking moving beam (ram) * Fully hydraulic design and operation, utilizing two hydraulic cylinders * Cylinder pistons ground, hard-chrome plated and ground a second time for precision and maximum life * High volume pump * Adjustable working pressure and pressure regulating gauge * All-steel, monoblock construction * Torsion bar for ram parallelism * Infinitely adjustable mechanical depth stops, pushbutton operated with electronic digital readout * Two-speed ram advance (hi/low) * Controls in a swiveling console on the machine, a movable pedestal with two-hand control, foot control, and emergency stop control * Two front support arms adjustable left-to-right on the dovetail * Sheet metal safety guards at back and sides of the machine * Electrics for 3/60/220 or 3/60/440 with controls as indicated above. Low voltage at the controls. * Flush floor mount * Safety limit switches for minimum and maximum settings of travel in power ram adjustment and power front operated backgauge THE TOOLING INCLUDED FEATURES: Upper beam set up to hold American style forming punches with standards safety tongue (drawing on request) Front-to-back wedge arrangement in bed for die compensation THE BACKGAUGE INCLUDED FEATURES: Go-to power backgauge with aluminum rail bar for easy, smooth operation Manual R axis (height of back stops) Manual Z axis (side-to-side adjustment of backgauge stops) THE CONTROL: Elgo go-to-control for X axis position (backgauge front to back for flange dimension) Elgo go-to control for Y axis position (ram depth for bend angle position) PLEASE NOTE: Special packages available with tooling and 200 step programmable control. PLEASE NOTE: The machine quoted here includes electrical components that will handle a voltage variance of +/- 5% from 220/440 volt. If your true incoming voltage under load exceeds this range, please advise upon ordering and the proper components will be sent (may require extra charge, depending on actual voltage); or, you will be subject to an additional handling charge if new components must be shipped at a later date.