15" x 50" cc, CLAUSING COLCHESTER, GEARHEAD, 3-PHSE, MODEL#8043, **NEW**


Specific Info On This Equipment



Condition: New


"If you need a machine and don't buy it, then you will ultimately find you have paid for it but don't have it."   Henry Ford

Full Product Description

Model:  8043
Capacity:
Height of center:  7.68"
Swing over bed:  15.75"
Swing in gap:  23"
Width in front of faceplate:  6.5"
Swing over cross slide:  9.7"
Bedway width:  12.5"
Headstock:
Spindle bore:  2.12"
Spindle nose (camlock):  D1-6
Spindle nose taper:  4MT
Number of spindle speeds:  16
Spindle Speed Range (rpm):  25-2000
Cross/Top Slide:
Travel of cross slide:  9.8"
Width of cross slide:  7.09"
Travel of top slide:  5.1"
Width of top slide:  3.93"
Tailstock:
Quill travel:  5.5"
Quill diameter:  2.8"
Quill taper:  5MT
Feeds & Threading:
Longitudinal feed range:  0.014"-0.096"in/rev
Number of inch pitches:  56
Range of inch pitches:  2-56 TPI
Number of metric pitches:  51
Range of metric pitches:  0.2-14mm
Number of diametral pitches:  20
Feeds & Threading Cont.:
Range of diametral pitches:  8-56 DP
Number of module pitches:  20
Range of module pitches:  0.2-3.5 MOD
Motor:
Spindle motor:  7.5 hp
Dimensions:
Swing & Center Distance:  15" x 50" G/H Gap
Length x Height x Width:  99" x 51" x 44"
Weight:  3,300 lbs.


FEATURES:
* All headstock gears are hardened and ground
* Spindle bearing, gears and shafts are lubricated by a
forced lubrication system
* An easy-to-read index plate makes it simple to select the
proper feed rate or thread
* The apron has hardened and ground gears and are lubricated
in a bath of oil
* Extra wide bed provides accuracy and minimal wear
* Easy access pull-out rolling chip bin
* Precision Gamet tapered roller spindle bearings
* Equipped with chuck guard, full splash guard and leadscrew
cover
* Clutch drive, reverse leadscrew with spindle turning for
faster thread cutting
* Clutches are operated by levers at apron and headstock for
forward/reverse
* A one year warranty and back by the Clausing Service
Center dedicated to support our customers with parts and
service

STANDARD EQUIPMENT:
* Chuck Guard Accuracy Chart
* Covered leadscrew
* Electric Coolant Pump, tank and fittings
* Emergency stop button
* End guard limit switch
* Forward/Reverse/Stop switch
* Lockable isolator switch
* Splash Guard
* Tee slotted top slide
* One shot sattle and cross side lubrication
* Pullout chip bin
* Thread indicator
* Tool box with wrenches and dead centers
* Instruction and spare parts manual
* 208/230 or 460 volts phase 60 Hz